Envelope interchange · 6.30×38.78 in

160×985 mm filter elements

17 elements from 1 brand(s) share this envelope: 160 mm outside diameter and 985 mm overall length (6.30×38.78 in).

Dimensional interchange — verify before substituting. These cartridges fit the same bowl space; they are not guaranteed drop-in equivalents. Compare grade, end caps, seals, collapse rating and bypass configuration for the specific duty.
ModelBrandID (mm)Micronβ ratingCollapse (bar)BypassSealType
05.8300.25VG.10.B.P.39 Eaton / Internormen — 20 — 10 housing Nitrile (Buna-N) inline
05.8300.6VG.10.B.P.39 Eaton / Internormen — 7 — 10 housing Nitrile (Buna-N) inline
05.8300.3VG.10.B.P.39 Eaton / Internormen — 5 — 10 housing Nitrile (Buna-N) inline
02.0500R.10VG.30.HC.S.P Eaton / Internormen — 10 — 30 housing Nitrile (Buna-N) inline
05.8300.6VG.10.B.V.39 Eaton / Internormen — 7 — 10 housing Fluorocarbon (Viton) inline
05.8900.12.200.10.E.P.26 Eaton / Internormen — 10 — 10 housing Nitrile (Buna-N) inline
02.1700 R.10VG.30.HC.S.P Eaton / Internormen — 10 — 30 housing Nitrile (Buna-N) inline
02.1700 R.20VG.30.HC.S.P Eaton / Internormen — 20 — 30 housing Nitrile (Buna-N) inline
05.8900.6VG.10.E.P.39 Eaton / Internormen — 7 — 10 housing Nitrile (Buna-N) inline
02.1700 R.3VG.30.HC.S.P Eaton / Internormen — 5 — 30 housing Nitrile (Buna-N) inline
02.1700 R.6VG.30.HC.E.P Eaton / Internormen — — — 30 housing Nitrile (Buna-N) inline
02.1700R.20VG.30.HC.E.P Eaton / Internormen — 20 — 30 housing Nitrile (Buna-N) inline
05.8304.6VG.10.B.P.39 Eaton / Internormen — 7 — 10 housing Nitrile (Buna-N) inline
05.8314.6VG.10.B.P.39 Eaton / Internormen — 7 — 10 housing Nitrile (Buna-N) inline
05.8314.12.200.10.B.P.39 Eaton / Internormen — 10 — 10 housing Nitrile (Buna-N) inline
02.0500 R.100G.30.HC.S. Eaton / Internormen — 100 — 30 housing — inline
03.1.1801.3VG.16.B.P.SON Eaton / Internormen — 5 — 16 housing Nitrile (Buna-N) inline

Substitution verification checklist

  1. Filtration grade. Compare at the same ISO 16889 Beta test point — “10 µm nominal” and “12 µm β1000” may be the same physical media.
  2. End caps & O-rings. Open/closed cap style and seal position block interchange even with identical OD/length.
  3. Seal compound. NBR is standard for mineral oil; phosphate-esters, high temperatures or bio-oils can demand fluorocarbon.
  4. Collapse rating. Low-collapse (~20 bar) return elements must never replace high-collapse (210 bar) pressure elements.
  5. Bypass strategy. Integral bypass valves (e.g. 3.4 bar) vs reusable housing valves change cold-start behaviour.

Frequently asked questions

Are all 160×985 mm filter elements interchangeable?
They share the same physical envelope — 160 mm OD and 985 mm length (6.30×38.78 in) — so they fit the same bowl. Interchangeability ends there: micron/Beta rating, end-cap geometry, seals, collapse rating and bypass configuration differ across the 17 elements listed and must be checked against the duty.
Is it a drop-in replacement if the OD and length match?
Only after verification. Confirm in order: (1) the filtration grade meets the ISO 4406 cleanliness target at the same Beta test point, (2) end-cap and O-ring arrangement is identical, (3) seal compound suits the fluid (NBR vs fluorocarbon), (4) collapse/burst rating fits pressure-line or cold-start conditions, and (5) the bypass strategy (integral valve vs housing valve) matches.
What is 160×985 mm in inches?
160×985 mm converts to approximately 6.30×38.78 in.

Browse all 160 mm OD elements or open the dimensions finder.

Request quote & availability

First reply within 2 business hours · first quotation — including the original brand and 1–2 verified equivalents — within 24 hours on business days.