Eaton / Internormen · 01.E / 01.N / Easy-Fit · inline line
573082 filter element: specifications & equivalents
The 573082 is a Eaton / Internormen inline-line hydraulic filter element, built with glass fiber media, sized 143 × 93 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Specs come from Eaton's product data hub via its site-search API. The µm retention rating follows ISO 16889 (absolute convention), while the model-code fineness grade is nominal — match both before substituting.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | Glass Fiber |
| Outside diameter OD | 143 mm |
| Length | 93 mm |
| End caps | open-ended cartridge element |
| Collapse / burst pressure | 18 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Seal material | NBR |
| Manufacturer part no. | 573082 |
| Source catalog | Eaton: Eaton product data hub via site search API (eaton.com) |
| Last verified | 2026-09-28 |
Sources: Eaton — Eaton product data hub via site search API (eaton.com) — accessed 2026-09-29.
Eaton / Internormen® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Eaton / Internormen distributor.
Dimensions & series range
| Outside diameter | 143 mm (5.630 in) |
| Overall length | 93 mm (3.661 in) |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ HF6203 | Fleetguard | partial | Fleetguard's online catalog lists 573082 as an interchange for HF6203. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the 573082 model number is decoded
- 573082Eaton Vickers Elements filter element model code (Eaton Vickers In-Line Filter Element).
- 573082Eaton catalog number (order code) for the same element.
- 10 µmFilter fineness grade: nominal rating and media letter.
- Glass FiberFilter media execution.
- 18 barDelta-P resistance class — maximum differential pressure (collapse) rating.
- NBRSeal compound.
- 143 mmOuter diameter.
- 93 mmElement height.
Typical equipment & applications
- Medium-pressure in-line and lubrication circuits
- Spin-on and exchange element replacements
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the 573082 filter element?
What replaces the 573082 filter element?
How do I read the 573082 part number?
Is a same-envelope aftermarket element always a drop-in replacement?
How often should a hydraulic return-line element be replaced?
Other models in the 01.E / 01.N / Easy-Fit series
All 3329 →Reviewed & verified by the ElementRef engineering desk against Eaton on 2026-09-28. Read our editorial & correction policy.