Eaton / Internormen · 01.E / 01.N / Easy-Fit · inline line
V0112B2C10 filter element: specifications & equivalents
The V0112B2C10 is a Eaton / Internormen inline-line hydraulic filter element, built with glass fiber media, sized 47 × 152 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 47 × 152 mm
Media Glass Fiber
Collapse / burst 10 bar
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.
Specs come from Eaton's product data hub via its site-search API. The µm retention rating follows ISO 16889 (absolute convention), while the model-code fineness grade is nominal — match both before substituting.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | Glass Fiber |
| Outside diameter OD | 47 mm |
| Length | 152 mm |
| End caps | open-ended cartridge element |
| Collapse / burst pressure | 10 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Seal material | NBR |
| Manufacturer part no. | V0112B2C10 |
| Source catalog | Eaton: Eaton product data hub via site search API (eaton.com) |
| Last verified | 2026-09-28 |
Sources: Eaton — Eaton product data hub via site search API (eaton.com) — accessed 2026-09-29.
Eaton / Internormen® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Eaton / Internormen distributor.
Dimensions & series range
| Outside diameter | 47 mm (1.850 in) |
| Overall length | 152 mm (5.984 in) |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 0110D010BNHC page in verification queue | Aftermarket | partial | Eaton's filtration cross-reference lists 0110D010BNHC (Hydac) as an interchange for V0112B2C10. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ BE110P12A page in verification queue | Aftermarket | partial | Eaton's filtration cross-reference lists BE110P12A (Behringer) as an interchange for V0112B2C10. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
| ↔ HD512 | MANN-FILTER | partial | MANN-FILTER's online catalog lists V0112B2C10 (VICKERS) as a comparison number for HD512. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6866 | Fleetguard | partial | Fleetguard's online catalog lists V0112B2C10 as an interchange for HF6866. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P170604 page in verification queue | Donaldson | partial | Eaton's filtration cross-reference lists P170604 (Donaldson) as an interchange for V0112B2C10. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
| ↔ PT9330-MPG | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists V0112B2C10 (VICKERS) as replaced by Baldwin PT9330-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-0110D-Z10B | Schroeder Industries | partial | Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals. |
| ↔ SE-030-G-10-B | STAUFF | partial | STAUFF Filter Interchange lists V0112B2C10 (VICKERS) as replaced by SE-030-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the V0112B2C10 model number is decoded
- V0112B2C10Eaton V011 Vickers filter element model code (Eaton V011 Vickers In-Line Filter Element).
- V0112B2C10Eaton catalog number (order code) for the same element.
- 10 µmFilter fineness grade: nominal rating and media letter.
- Glass FiberFilter media execution.
- 10 barDelta-P resistance class — maximum differential pressure (collapse) rating.
- NBRSeal compound.
- 47 mmOuter diameter.
- 152 mmElement height.
Typical equipment & applications
- Medium-pressure in-line and lubrication circuits
- Spin-on and exchange element replacements
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the V0112B2C10 filter element?
The published envelope is 47 mm OD × 152 mm length (1.850 × 5.984 in). Confirm against the housing drawing before ordering.
What replaces the V0112B2C10 filter element?
8 partial match(es) requiring parameter review
How do I read the V0112B2C10 part number?
See the designation decoder above: each segment of V0112B2C10 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Other models in the 01.E / 01.N / Easy-Fit series
All 3329 → 01.1910.40G.16.E.O.SON 01.20213.130G.E.O 01.21657.25VG.10.B.N.IS09 01.41542.25VG.16.B.N.IS09 01.AS 180.250G.-.E.T.- 01.AS 180.40G.-.E.T.- 01.AS 180.80G.-.E.T.- 01.AS 220.130G.-.B.-.- 01.AS 220.250G.-.B.-.- 01.AS 220.25G.-.B.-.-
Reviewed & verified by the ElementRef engineering desk against Eaton on 2026-09-28. Read our editorial & correction policy.