Eaton / Internormen · 01.E / 01.N / Easy-Fit · pressure line
V0211B2R05 filter element: specifications & equivalents
The V0211B2R05 is a Eaton / Internormen pressure-line hydraulic filter element, built with r-pak media, sized 127 × 274.32 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 127 × 274.32 mm
Media R-Pak
Collapse / burst 10 bar
Line type pressure
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.
Specs come from Eaton's product data hub via its site-search API. The µm retention rating follows ISO 16889 (absolute convention), while the model-code fineness grade is nominal — match both before substituting.
Specification table
| Parameter | Value |
|---|---|
| Filter type | pressure line |
| Media | R-Pak |
| Outside diameter OD | 127 mm |
| Length | 274.32 mm |
| End caps | open-ended cartridge element |
| Collapse / burst pressure | 10 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Seal material | Nitrile (Buna-N) |
| Manufacturer part no. | V0211B2R05 |
| Source catalog | Eaton: Eaton product data hub via site search API (eaton.com) |
| Last verified | 2026-09-28 |
Sources: Eaton — Eaton product data hub via site search API (eaton.com) — accessed 2026-09-29.
Eaton / Internormen® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Eaton / Internormen distributor.
Dimensions & series range
| Outside diameter | 127 mm (5.000 in) |
| Overall length | 274.32 mm (10.800 in) |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ 51847 | WIX Filters | partial | Eaton's filtration cross-reference lists 51847 (Wix) as an interchange for V0211B2R05. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ BS0128E06A38 page in verification queue | Aftermarket | partial | Eaton's filtration cross-reference lists BS0128E06A38 (Behringer) as an interchange for V0211B2R05. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ HC7500SKN8H page in verification queue | Pall | partial | Eaton's filtration cross-reference lists HC7500SKN8H (Pall) as an interchange for V0211B2R05. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
| ↔ HF6707 | Fleetguard | partial | Fleetguard's online catalog lists V0211B2R05 as an interchange for HF6707. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6707 | Fleetguard | partial | Eaton's filtration cross-reference lists HF6707 (Fleetguard) as an interchange for V0211B2R05. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ MFE160110BN page in verification queue | Aftermarket | partial | Eaton's filtration cross-reference lists MFE-160/1-10BN/ (Hydac) as an interchange for V0211B2R05. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
| ↔ P165762 | Donaldson | partial | Eaton's filtration cross-reference lists P165762 (Donaldson) as an interchange for V0211B2R05. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ R750H0806A page in verification queue | Aftermarket | partial | Eaton's filtration cross-reference lists R750-H-0806A (Arlon) as an interchange for V0211B2R05. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
| ↔ SBF-7500-8Z5B | Schroeder Industries | partial | Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals. |
| ↔ SF-6707-MG | STAUFF | partial | STAUFF Filter Interchange lists V0211B2R05 (VICKERS) as replaced by SF-6707-MG. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ ST2870 page in verification queue | Aftermarket | partial | Eaton's filtration cross-reference lists ST2870 (Fleetguard) as an interchange for V0211B2R05. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ ST6707 page in verification queue | Aftermarket | partial | Eaton's filtration cross-reference lists ST6707 (Fleetguard) as an interchange for V0211B2R05. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
| ↔ WD13006X | MANN-FILTER | partial | MANN-FILTER's online catalog lists V0211B2R05 (VICKERS) as a comparison number for WD13006X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the V0211B2R05 model number is decoded
- V0211B2R05Eaton V021 Vickers filter element model code (Eaton V021 Vickers Pressure Filter Element).
- V0211B2R05Eaton catalog number (order code) for the same element.
- R05Filter fineness grade: nominal rating and media letter.
- R-PakFilter media execution.
- 10 barDelta-P resistance class — maximum differential pressure (collapse) rating.
- Nitrile (Buna-N)Seal compound.
- 127 mmOuter diameter.
- 274.32 mmElement height.
Typical equipment & applications
- Pressure-line hydraulic filters upstream of control valves
- High-differential-pressure industrial hydraulic circuits
- Hydraulic power units for steel, paper and power generation
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the V0211B2R05 filter element?
The published envelope is 127 mm OD × 274.32 mm length (5.000 × 10.800 in). Confirm against the housing drawing before ordering.
What replaces the V0211B2R05 filter element?
13 partial match(es) requiring parameter review
How do I read the V0211B2R05 part number?
See the designation decoder above: each segment of V0211B2R05 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Other models in the 01.E / 01.N / Easy-Fit series
All 3329 → 01.1910.40G.16.E.O.SON 01.20213.130G.E.O 01.21657.25VG.10.B.N.IS09 01.41542.25VG.16.B.N.IS09 01.AS 180.250G.-.E.T.- 01.AS 180.40G.-.E.T.- 01.AS 180.80G.-.E.T.- 01.AS 220.130G.-.B.-.- 01.AS 220.250G.-.B.-.- 01.AS 220.25G.-.B.-.-
Reviewed & verified by the ElementRef engineering desk against Eaton on 2026-09-28. Read our editorial & correction policy.