Fleetguard · HF Hydraulic · inline line
HF35133 filter element: specifications & equivalents
The HF35133 is a Fleetguard inline-line hydraulic filter element, sized 203 × 825 mm OD × length (ID 157 mm), rated at 17 µm absolute (17 µm at β75(c) per ISO 16889). Verify against the current manufacturer data sheet before ordering.
Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Filtration rating | 17 µm |
| Rating basis | absolute |
| Beta ratio | 17 µm at β75(c) per ISO 16889 |
| Outside diameter OD | 203 mm |
| Inside diameter ID | 157 mm |
| Length | 825 mm |
| End caps | open-ended cartridge element |
| Rated flow | 1500 L/min |
| Collapse / burst pressure | 8 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HF35133 |
| Source catalog | Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com) |
| Last verified | 2026-09-28 |
Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.
Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.
Dimensions & series range
| Outside diameter | 203 mm (7.992 in) |
| Inside diameter | 157 mm (6.181 in) |
| Overall length | 825 mm (32.480 in) |
All 203×825 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ FC1115Q020BS page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists FC1115Q020BS as an interchange for HF35133. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ R743G25P page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists R743G25P as an interchange for HF35133. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ TXW13RCC25 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists TXW13RCC25 as an interchange for HF35133. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ TXW13RGDL20 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists TXW13RGDL20 as an interchange for HF35133. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HF35133 model number is decoded
- HF35133Fleetguard HF-series hydraulic cartridge element part number.
- 825 mmOverall height.
- 203 mmLargest outside diameter.
- 157 mmLargest end inside diameter.
- 17 µm at β75(c) per ISO 16889Published efficiency ratings.
Typical equipment & applications
- Construction, agricultural and industrial hydraulic circuits
- Mobile-equipment hydraulic return and pressure lines
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HF35133 filter element?
What micron rating does HF35133 use?
What replaces the HF35133 filter element?
How do I read the HF35133 part number?
Is a same-envelope aftermarket element always a drop-in replacement?
How often should a hydraulic return-line element be replaced?
Same-envelope elements from other brands
View full interchange →These 8 catalog element(s) share the 203×825 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the HF Hydraulic series
All 2621 →Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.