Fleetguard · HF Hydraulic · inline line
HF35163 filter element: specifications & equivalents
The HF35163 is a Fleetguard inline-line hydraulic filter element, sized 149 × 150 mm OD × length, rated at 115 µm absolute (115 µm at β75(c) per ISO 16889). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 149 × 150 mm
Filtration rating 115 µm abs.
Beta rating 115 µm at β75(c) per ISO 16889
Collapse / burst 1 bar
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.
Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Filtration rating | 115 µm |
| Rating basis | absolute |
| Beta ratio | 115 µm at β75(c) per ISO 16889 |
| Outside diameter OD | 149 mm |
| Length | 150 mm |
| End caps | open-ended cartridge element |
| Rated flow | 225 L/min |
| Collapse / burst pressure | 1 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HF35163 |
| Source catalog | Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com) |
| Last verified | 2026-09-28 |
Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.
Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.
Dimensions & series range
| Outside diameter | 149 mm (5.866 in) |
| Overall length | 150 mm (5.906 in) |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 28218 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 28218 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 6760105 page in verification queue | UFI | partial | Fleetguard's online catalog lists 6760105 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 77201232M090 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 77201232M090 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ FS140B8T125 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists FS140B8T125 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ FS141T125 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists FS141T125 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ H00714031 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists H00714031 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HD15004 | MANN-FILTER | partial | MANN-FILTER's online catalog lists HF35163 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for HD15004. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HD15004 | MANN-FILTER | partial | Fleetguard's online catalog lists HD15004 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ LSE227 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists LSE227 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P171893 page in verification queue | Donaldson | partial | Fleetguard's online catalog lists P171893 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ PI17108 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists PI17108 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT9277 | Baldwin Filters | partial | Fleetguard's online catalog lists PT9277 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT9277 | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists HF35163 (FLEETGUARD) as replaced by Baldwin PT9277. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SE1219 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SE1219 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SF150A200GA page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SF150A200GA as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH77013 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SH77013 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SS1D7A1AP page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SS1D7A1AP as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ STR1402SG1M90 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists STR1402SG1M90 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SUS260B32P0125 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SUS260B32P0125 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ UCSE1219 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists UCSE1219 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WGSE1219 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists WGSE1219 as an interchange for HF35163. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HF35163 model number is decoded
- HF35163Fleetguard HF-series hydraulic cartridge element part number.
- 150 mmOverall height.
- 149 mmLargest outside diameter.
- 115 µm at β75(c) per ISO 16889Published efficiency ratings.
Typical equipment & applications
- Construction, agricultural and industrial hydraulic circuits
- Mobile-equipment hydraulic return and pressure lines
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HF35163 filter element?
The published envelope is 149 mm OD × 150 mm length (5.866 × 5.906 in). Confirm against the housing drawing before ordering.
What micron rating does HF35163 use?
This element is rated 115 µm absolute — 115 µm at β75(c) per ISO 16889. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the HF35163 filter element?
21 partial match(es) requiring parameter review
How do I read the HF35163 part number?
See the designation decoder above: each segment of HF35163 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Other models in the HF Hydraulic series
All 2621 →Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.