Fleetguard · HF Hydraulic · inline line
HF35212 filter element: specifications & equivalents
The HF35212 is a Fleetguard inline-line hydraulic filter element, sized 130 × 152 mm OD × length (ID 51.5 mm), rated at 57 µm absolute (57 µm at β75(c) per ISO 16889). Verify against the current manufacturer data sheet before ordering.
Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Filtration rating | 57 µm |
| Rating basis | absolute |
| Beta ratio | 57 µm at β75(c) per ISO 16889 |
| Outside diameter OD | 130 mm |
| Inside diameter ID | 51.5 mm |
| Length | 152 mm |
| End caps | open-ended cartridge element |
| Rated flow | 20 L/min |
| Collapse / burst pressure | 3 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HF35212 |
| Source catalog | Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com) |
| Last verified | 2026-09-28 |
Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.
Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.
Dimensions & series range
| Outside diameter | 130 mm (5.118 in) |
| Inside diameter | 51.5 mm (2.028 in) |
| Overall length | 152 mm (5.984 in) |
All 130×152 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 1819131 page in verification queue | UFI | partial | Fleetguard's online catalog lists 1819131 as an interchange for HF35212. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ ERA51NCD page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists ERA51NCD as an interchange for HF35212. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HD13018X | MANN-FILTER | partial | MANN-FILTER's online catalog lists HF35212 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for HD13018X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ MF4001P25NB page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists MF4001P25NB as an interchange for HF35212. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P763276 page in verification queue | Donaldson | partial | Fleetguard's online catalog lists P763276 as an interchange for HF35212. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT23147 | Baldwin Filters | partial | Fleetguard's online catalog lists PT23147 as an interchange for HF35212. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ R150C25B page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists R150C25B as an interchange for HF35212. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HF35212 model number is decoded
- HF35212Fleetguard HF-series hydraulic cartridge element part number.
- 152 mmOverall height.
- 130 mmLargest outside diameter.
- 51.5 mmLargest end inside diameter.
- 57 µm at β75(c) per ISO 16889Published efficiency ratings.
Typical equipment & applications
- Construction, agricultural and industrial hydraulic circuits
- Mobile-equipment hydraulic return and pressure lines
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HF35212 filter element?
What micron rating does HF35212 use?
What replaces the HF35212 filter element?
How do I read the HF35212 part number?
Is a same-envelope aftermarket element always a drop-in replacement?
How often should a hydraulic return-line element be replaced?
Same-envelope elements from other brands
View full interchange →These 1 catalog element(s) share the 130×152 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the HF Hydraulic series
All 2621 →Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.