Fleetguard · HF Hydraulic · inline line
HF35337 filter element: specifications & equivalents
The HF35337 is a Fleetguard inline-line hydraulic filter element, sized 114 × 399 mm OD × length (ID 68.2 mm), rated at 10 µm absolute (10 µm at β75(c); 11 µm at β200(c) per ISO 16889). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 114 × 399 mm
Inside diameter 68.2 mm
Filtration rating 10 µm abs.
Beta rating 10 µm at β75(c); 11 µm at β200(c) per ISO 16889
Collapse / burst 25 bar
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.
Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Filtration rating | 10 µm |
| Rating basis | absolute |
| Beta ratio | 10 µm at β75(c); 11 µm at β200(c) per ISO 16889 |
| Outside diameter OD | 114 mm |
| Inside diameter ID | 68.2 mm |
| Length | 399 mm |
| End caps | open-ended cartridge element |
| Rated flow | 850 L/min |
| Collapse / burst pressure | 25 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HF35337 |
| Source catalog | Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com) |
| Last verified | 2026-09-28 |
Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.
Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.
Dimensions & series range
| Outside diameter | 114 mm (4.488 in) |
| Inside diameter | 68.2 mm (2.685 in) |
| Overall length | 399 mm (15.709 in) |
All 114×399 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 0800RK010BN3HC page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 0800RK010BN3HC as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 0800RK010BNHC page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 0800RK010BNHC as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 118266 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 118266 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 1268124 page in verification queue | UFI | partial | Fleetguard's online catalog lists 1268124 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 1271365 page in verification queue | UFI | partial | Fleetguard's online catalog lists 1271365 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 3014873 page in verification queue | UFI | partial | Fleetguard's online catalog lists 3014873 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 70525845 page in verification queue | UFI | partial | Fleetguard's online catalog lists 70525845 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 800RK010BN3HC page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 800RK010BN3HC as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 800RK010BNHC page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 800RK010BNHC as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 80623663 page in verification queue | UFI | partial | Fleetguard's online catalog lists 80623663 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 939788Q page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 939788Q as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 94380 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 94380 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 9624541001 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 9624541001 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ H0800RK2010 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists H0800RK2010 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HD12112/2 | MANN-FILTER | partial | MANN-FILTER's online catalog lists HF35337 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for HD121122. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HD12112/2 | MANN-FILTER | partial | Fleetguard's online catalog lists HD121122 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HY13444 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists HY13444 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P958435 page in verification queue | Donaldson | partial | Fleetguard's online catalog lists P958435 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT23033-MPG | Baldwin Filters | partial | Fleetguard's online catalog lists PT23033MPG as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT23033-MPG | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists HF35337 (FLEETGUARD) as replaced by Baldwin PT23033-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ RE200G10B2OBE page in verification queue | STAUFF | partial | Fleetguard's online catalog lists RE200G10B2OBE as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ RE-200-G-10-B-OBE | STAUFF | partial | Fleetguard's online catalog lists RE200G10BOBE as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ RHK800G10B page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists RHK800G10B as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ RHY800K1610GVD page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists RHY800K1610GVD as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH74408 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SH74408 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH74408FANMO page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SH74408FANMO as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH74408SP page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SH74408SP as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH75208 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SH75208 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ W01AG431 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists W01AG431 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ W118266 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists W118266 as an interchange for HF35337. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HF35337 model number is decoded
- HF35337Fleetguard HF-series hydraulic cartridge element part number.
- 399 mmOverall height.
- 114 mmLargest outside diameter.
- 68.2 mmLargest end inside diameter.
- 10 µm at β75(c); 11 µm at β200(c) per ISO 16889Published efficiency ratings.
Typical equipment & applications
- Construction, agricultural and industrial hydraulic circuits
- Mobile-equipment hydraulic return and pressure lines
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HF35337 filter element?
The published envelope is 114 mm OD × 399 mm length with a 68.2 mm inside diameter (4.488 × 15.709 in × 2.685 in ID). Confirm against the housing drawing before ordering.
What micron rating does HF35337 use?
This element is rated 10 µm absolute — 10 µm at β75(c); 11 µm at β200(c) per ISO 16889. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the HF35337 filter element?
30 partial match(es) requiring parameter review
How do I read the HF35337 part number?
See the designation decoder above: each segment of HF35337 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 3 catalog element(s) share the 114×399 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the HF Hydraulic series
All 2621 →Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.