Fleetguard · HF Hydraulic · inline line
HF35499 filter element: specifications & equivalents
The HF35499 is a Fleetguard inline-line hydraulic filter element, sized 178 × 450 mm OD × length (ID 110 mm), rated at 10 µm absolute (10 µm at β75(c); 11 µm at β200(c) per ISO 16889). Verify against the current manufacturer data sheet before ordering.
Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Filtration rating | 10 µm |
| Rating basis | absolute |
| Beta ratio | 10 µm at β75(c); 11 µm at β200(c) per ISO 16889 |
| Outside diameter OD | 178 mm |
| Inside diameter ID | 110 mm |
| Length | 450 mm |
| End caps | open-ended cartridge element |
| Rated flow | 576 L/min |
| Collapse / burst pressure | 12 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HF35499 |
| Source catalog | Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com) |
| Last verified | 2026-09-28 |
Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.
Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.
Dimensions & series range
| Outside diameter | 178 mm (7.008 in) |
| Inside diameter | 110 mm (4.331 in) |
| Overall length | 450 mm (17.717 in) |
All 178×450 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 14532086 page in verification queue | UFI | partial | Fleetguard's online catalog lists 14532086 as an interchange for HF35499. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SFH2086 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SFH2086 as an interchange for HF35499. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH60263 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SH60263 as an interchange for HF35499. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HF35499 model number is decoded
- HF35499Fleetguard HF-series hydraulic cartridge element part number.
- 450 mmOverall height.
- 178 mmLargest outside diameter.
- 110 mmLargest end inside diameter.
- 10 µm at β75(c); 11 µm at β200(c) per ISO 16889Published efficiency ratings.
Typical equipment & applications
- Construction, agricultural and industrial hydraulic circuits
- Mobile-equipment hydraulic return and pressure lines
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HF35499 filter element?
What micron rating does HF35499 use?
What replaces the HF35499 filter element?
How do I read the HF35499 part number?
Is a same-envelope aftermarket element always a drop-in replacement?
How often should a hydraulic return-line element be replaced?
Same-envelope elements from other brands
View full interchange →These 2 catalog element(s) share the 178×450 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the HF Hydraulic series
All 2621 →Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.