Fleetguard · HF Hydraulic · inline line
HF35534 filter element: specifications & equivalents
The HF35534 is a Fleetguard inline-line hydraulic filter element, sized 127 × 464.31 mm OD × length (ID 83.82 mm), rated at 6.8 µm absolute (6.8 µm at β75(c); 8 µm at β200(c) per ISO 16889). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 127 × 464.31 mm
Inside diameter 83.82 mm
Filtration rating 6.8 µm abs.
Beta rating 6.8 µm at β75(c); 8 µm at β200(c) per ISO 16889
Collapse / burst 10.342 bar
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.
Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Filtration rating | 6.8 µm |
| Rating basis | absolute |
| Beta ratio | 6.8 µm at β75(c); 8 µm at β200(c) per ISO 16889 |
| Outside diameter OD | 127 mm |
| Inside diameter ID | 83.82 mm |
| Length | 464.31 mm |
| End caps | open-ended cartridge element |
| Collapse / burst pressure | 10.342 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HF35534 |
| Source catalog | Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com) |
| Last verified | 2026-09-28 |
Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.
Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.
Dimensions & series range
| Outside diameter | 127 mm (5.000 in) |
| Inside diameter | 83.82 mm (3.300 in) |
| Overall length | 464.31 mm (18.280 in) |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 50557 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 50557 as an interchange for HF35534. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 7628610 page in verification queue | UFI | partial | Fleetguard's online catalog lists 7628610 as an interchange for HF35534. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ 935122 | Parker | partial | Fleetguard's online catalog lists 935122 as an interchange for HF35534. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ BBS7 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists BBS7 as an interchange for HF35534. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ BBZ10 | Schroeder Industries | partial | Fleetguard's online catalog lists BBZ10 as an interchange for HF35534. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ BEB1812A page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists BEB1812A as an interchange for HF35534. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HPBL1812MB page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists HPBL1812MB as an interchange for HF35534. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HY9180 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists HY9180 as an interchange for HF35534. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ MP11442 page in verification queue | MP Filtri | partial | Fleetguard's online catalog lists MP11442 as an interchange for HF35534. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P560400 page in verification queue | Donaldson | partial | Fleetguard's online catalog lists P560400 as an interchange for HF35534. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ PSCB1810GB page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists PSCB1810GB as an interchange for HF35534. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT23520-MPG | Baldwin Filters | partial | Fleetguard's online catalog lists PT23520MPG as an interchange for HF35534. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SFBB10C page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SFBB10C as an interchange for HF35534. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WG315 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists WG315 as an interchange for HF35534. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HF35534 model number is decoded
- HF35534Fleetguard HF-series hydraulic cartridge element part number.
- 464.31 mmOverall height.
- 127 mmLargest outside diameter.
- 83.82 mmLargest end inside diameter.
- 6.8 µm at β75(c); 8 µm at β200(c) per ISO 16889Published efficiency ratings.
Typical equipment & applications
- Construction, agricultural and industrial hydraulic circuits
- Mobile-equipment hydraulic return and pressure lines
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HF35534 filter element?
The published envelope is 127 mm OD × 464.31 mm length with a 83.82 mm inside diameter (5.000 × 18.280 in × 3.300 in ID). Confirm against the housing drawing before ordering.
What micron rating does HF35534 use?
This element is rated 6.8 µm absolute — 6.8 µm at β75(c); 8 µm at β200(c) per ISO 16889. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the HF35534 filter element?
14 partial match(es) requiring parameter review
How do I read the HF35534 part number?
See the designation decoder above: each segment of HF35534 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Other models in the HF Hydraulic series
All 2621 →Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.