Fleetguard · HF Hydraulic · inline line
HF40007 filter element: specifications & equivalents
The HF40007 is a Fleetguard inline-line hydraulic filter element, built with microglass media, sized 174 × 228.22 mm OD × length (ID 107 mm), rated at 6 µm absolute (6 µm at β75(c) per ISO 16889). Verify against the current manufacturer data sheet before ordering.
Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | Microglass |
| Filtration rating | 6 µm |
| Rating basis | absolute |
| Beta ratio | 6 µm at β75(c) per ISO 16889 |
| Outside diameter OD | 174 mm |
| Inside diameter ID | 107 mm |
| Length | 228.22 mm |
| End caps | open-ended cartridge element |
| Rated flow | 227 L/min |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HF40007 |
| Source catalog | Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com) |
| Last verified | 2026-09-28 |
Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.
Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.
Dimensions & series range
| Outside diameter | 174 mm (6.850 in) |
| Inside diameter | 107 mm (4.213 in) |
| Overall length | 228.22 mm (8.985 in) |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 2433758 page in verification queue | UFI | partial | Fleetguard's online catalog lists 2433758 as an interchange for HF40007. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P581027 page in verification queue | Donaldson | partial | Fleetguard's online catalog lists P581027 as an interchange for HF40007. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HF40007 model number is decoded
- HF40007Fleetguard HF-series hydraulic cartridge element part number.
- 228.22 mmOverall height.
- 174 mmLargest outside diameter.
- 107 mmLargest end inside diameter.
- 6 µm at β75(c) per ISO 16889Published efficiency ratings.
Typical equipment & applications
- Construction, agricultural and industrial hydraulic circuits
- Mobile-equipment hydraulic return and pressure lines
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HF40007 filter element?
What micron rating does HF40007 use?
What replaces the HF40007 filter element?
How do I read the HF40007 part number?
Is a same-envelope aftermarket element always a drop-in replacement?
How often should a hydraulic return-line element be replaced?
Other models in the HF Hydraulic series
All 2621 →Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.