Fleetguard · HF Hydraulic · inline line
HF40010 filter element: specifications & equivalents
The HF40010 is a Fleetguard inline-line hydraulic filter element, sized 99.06 × 228.6 mm OD × length, rated at 15.5 µm absolute (15.5 µm at β75(c) per ISO 16889). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 99.06 × 228.6 mm
Filtration rating 15.5 µm abs.
Beta rating 15.5 µm at β75(c) per ISO 16889
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.
Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Filtration rating | 15.5 µm |
| Rating basis | absolute |
| Beta ratio | 15.5 µm at β75(c) per ISO 16889 |
| Outside diameter OD | 99.06 mm |
| Length | 228.6 mm |
| End caps | open-ended cartridge element |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HF40010 |
| Source catalog | Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com) |
| Last verified | 2026-09-28 |
Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.
Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.
Dimensions & series range
| Outside diameter | 99.06 mm (3.900 in) |
| Overall length | 228.6 mm (9.000 in) |
All 99×229 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 1108803 page in verification queue | UFI | partial | Fleetguard's online catalog lists 1108803 as an interchange for HF40010. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ 51409 | WIX Filters | partial | Fleetguard's online catalog lists 51409 as an interchange for HF40010. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 85409 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 85409 as an interchange for HF40010. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 92409 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 92409 as an interchange for HF40010. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HF988 page in verification queue | Fleetguard | partial | Fleetguard's online catalog lists HF988 as an interchange for HF40010. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P174610 page in verification queue | Donaldson | partial | Fleetguard's online catalog lists P174610 as an interchange for HF40010. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT8306-10 | Baldwin Filters | partial | Fleetguard's online catalog lists PT830610 as an interchange for HF40010. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ RE40910 page in verification queue | STAUFF | partial | Fleetguard's online catalog lists RE40910 as an interchange for HF40010. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH66070 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SH66070 as an interchange for HF40010. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ TIE120101 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists TIE120101 as an interchange for HF40010. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WP345 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists WP345 as an interchange for HF40010. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HF40010 model number is decoded
- HF40010Fleetguard HF-series hydraulic cartridge element part number.
- 228.6 mmOverall height.
- 99.06 mmLargest outside diameter.
- 15.5 µm at β75(c) per ISO 16889Published efficiency ratings.
Typical equipment & applications
- Construction, agricultural and industrial hydraulic circuits
- Mobile-equipment hydraulic return and pressure lines
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HF40010 filter element?
The published envelope is 99.06 mm OD × 228.6 mm length (3.900 × 9.000 in). Confirm against the housing drawing before ordering.
What micron rating does HF40010 use?
This element is rated 15.5 µm absolute — 15.5 µm at β75(c) per ISO 16889. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the HF40010 filter element?
11 partial match(es) requiring parameter review
How do I read the HF40010 part number?
See the designation decoder above: each segment of HF40010 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 83 catalog element(s) share the 99×229 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
V4051B3C03 V4051V3C03 V4051V3C05 V4051V3C10 V4051V3C20 V4054B3H03 V4054B3H10 V4054B6H05 V4054B7H03 V4054B7H10
Other models in the HF Hydraulic series
All 2621 →Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.