Fleetguard · HF Hydraulic · return line
HF6348 filter element: specifications & equivalents
The HF6348 is a Fleetguard return-line hydraulic filter element, sized 128.93 × 272.01 mm OD × length, rated at 1 µm class (TWA 1 µm at β=2 per ISO 16889). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 128.93 × 272.01 mm
Filtration rating 1 µm nom.
Beta rating TWA 1 µm at β=2 per ISO 16889
Thread 1.00 1/2-16 UN-2B
Line type return
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.
Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | return line |
| Filtration rating | 1 µm |
| Rating basis | nominal |
| Beta ratio | TWA 1 µm at β=2 per ISO 16889 |
| Outside diameter OD | 128.93 mm |
| Length | 272.01 mm |
| Thread / connection | 1.00 1/2-16 UN-2B |
| End caps | spin-on baseplate with attached gasket |
| Flow direction | outside-in |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HF6348 |
| Source catalog | Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com) |
| Last verified | 2026-09-28 |
Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.
Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.
Dimensions & series range
| Outside diameter | 128.93 mm (5.076 in) |
| Overall length | 272.01 mm (10.709 in) |
All 129×272 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 25012531 page in verification queue | UFI | partial | Fleetguard's online catalog lists 25012531 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 3I0748 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 3I0748 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ 51859 | WIX Filters | partial | Fleetguard's online catalog lists 51859 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 610203 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 610203 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ A161845 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists A161845 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ A161846 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists A161846 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ A169652 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists A169652 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ A176594 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists A176594 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ BT345 | Baldwin Filters | partial | Fleetguard's online catalog lists BT345 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ BT345KIT page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists BT345KIT as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ CPK1577 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists CPK1577 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HC7909 page in verification queue | Pall | partial | Fleetguard's online catalog lists HC7909 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HF0634800 page in verification queue | Fleetguard | partial | Fleetguard's online catalog lists HF0634800 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ L295 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists L295 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P169084 page in verification queue | Donaldson | partial | Fleetguard's online catalog lists P169084 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P551211 page in verification queue | Donaldson | partial | Fleetguard's online catalog lists P551211 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P551228 page in verification queue | Donaldson | partial | Fleetguard's online catalog lists P551228 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P779603 page in verification queue | Donaldson | partial | Fleetguard's online catalog lists P779603 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ PF2020 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists PF2020 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH66101 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SH66101 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ VPK1577 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists VPK1577 as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ WD13010-2X | MANN-FILTER | partial | MANN-FILTER's online catalog lists HF6348 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD130102X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ WD13010-2X | MANN-FILTER | partial | Fleetguard's online catalog lists WD130102X as an interchange for HF6348. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HF6348 model number is decoded
- HF6348Fleetguard HF-series hydraulic spin-on filter part number.
- 272.01 mmOverall height.
- 128.93 mmLargest outside diameter.
- 1.00 1/2-16 UN-2BSpin-on mounting thread.
- TWA 1 µm at β=2 per ISO 16889Published efficiency ratings.
Typical equipment & applications
- Construction, agricultural and industrial hydraulic circuits
- Mobile-equipment hydraulic return and pressure lines
Selection pitfalls — read before you substitute
- A return-line element is not a pressure-line element: return cartridges (BN4HC low-collapse) tolerate roughly 20 bar differential, while BH4HC pressure executions are rated to 210 bar. Installing a low-collapse element in a pressure housing can rupture the media on cold-start spikes.
- This element has no integral bypass — opening pressure is set by the housing’s reusable bypass valve. Confirm the valve setting (commonly 3.4 bar) is present before fitting.
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- Fine 1 µm media loads faster and runs at a higher cold Δp than coarser grades — only downgrade cleanliness targets if the system ISO 4406 code allows it.
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HF6348 filter element?
The published envelope is 128.93 mm OD × 272.01 mm length (5.076 × 10.709 in). Confirm against the housing drawing before ordering.
What micron rating does HF6348 use?
This element is rated 1 µm (nominal class) — TWA 1 µm at β=2 per ISO 16889. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the HF6348 filter element?
23 partial match(es) requiring parameter review
How do I read the HF6348 part number?
See the designation decoder above: each segment of HF6348 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 18 catalog element(s) share the 129×272 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the HF Hydraulic series
All 2621 →Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.