MANN-FILTER · HD / WD Hydraulic · inline line
HD11008X filter element: specifications & equivalents
The HD11008X is a MANN-FILTER inline-line hydraulic filter element, sized 95 × 626 mm OD × length (ID 48 mm). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 95 × 626 mm
Inside diameter 48 mm
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.92.
Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 95 mm |
| Inside diameter ID | 48 mm |
| Length | 626 mm |
| End caps | open-ended cartridge element |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HD11008X_MANN-FILTER |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-09-28 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.
Dimensions & series range
| Outside diameter | 95 mm (3.740 in) |
| Inside diameter | 48 mm (1.890 in) |
| Overall length | 626 mm (24.646 in) |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 1202460 page in verification queue | UFI | partial | MANN-FILTER's online catalog lists 120 - 2460 (HYDAC) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 8313500 page in verification queue | UFI | partial | MANN-FILTER's online catalog lists 83.135.00 (UFI) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 940342Q page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 940342Q (PARKER (PARKER HANNIFIN)) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ CF00160559 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists CF-001-6-0559 (FAI FILTRI) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ DGMH85462 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists DGMH85462 (DIGOEMA FILTER) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ FH2238 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists FH2238 (FILDA FILTER) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF29039 | Fleetguard | partial | MANN-FILTER's online catalog lists HF29039 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HY13400 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HY 13400 (SCHUPP / SF FILTER) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P550826 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P550826 (DONALDSON) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT23450-MPG | Baldwin Filters | partial | MANN-FILTER's online catalog lists PT23450-MPG (BALDWIN) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ RE135G10B21650 page in verification queue | STAUFF | partial | MANN-FILTER's online catalog lists RE-135G10B/2-1650 (STAUFF) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ RHR750G10B6013 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists RHR750G10B6/013 (FILTREC) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH74192 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SH 74192 (HIFI-FILTER (JURA FILTRATION)) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WG1014 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists WG1014 (FILTREC) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WHE28330 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists WHE28330 (WISMET) as a comparison number for HD11008X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HD11008X model number is decoded
- HD11008XMANN-FILTER hydraulic cartridge element part number.
- 626 mmElement height (H).
- 95 mmOuter diameter (A).
- 48 mmInner diameter (B).
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HD11008X filter element?
The published envelope is 95 mm OD × 626 mm length with a 48 mm inside diameter (3.740 × 24.646 in × 1.890 in ID). Confirm against the housing drawing before ordering.
What replaces the HD11008X filter element?
15 partial match(es) requiring parameter review
How do I read the HD11008X part number?
See the designation decoder above: each segment of HD11008X encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Other models in the HD / WD Hydraulic series
All 880 →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.