MANN-FILTER · HD / WD Hydraulic · inline line
WD10006 filter element: specifications & equivalents
The WD10006 is a MANN-FILTER inline-line hydraulic filter element, sized 94 × 133 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 94 × 133 mm
Thread 1 1/2-16 UN-2B
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.92.
Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 94 mm |
| Length | 133 mm |
| Thread / connection | 1 1/2-16 UN-2B |
| End caps | spin-on baseplate with attached gasket |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | WD10006_MANN-FILTER |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-09-28 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.
Dimensions & series range
| Outside diameter | 94 mm (3.701 in) |
| Overall length | 133 mm (5.236 in) |
All 94×133 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 51203 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 51203 (WIX) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 70201 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 70201 (CIM TEK) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 70202 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 70202 (CIM TEK) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 7400412UM page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 7400412UM (TRIBOGUARD) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 8014500 page in verification queue | UFI | partial | MANN-FILTER's online catalog lists 80.145.00 (UFI) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 85203 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 85203 (CARQUEST) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HC7400SDS4H page in verification queue | Pall | partial | MANN-FILTER's online catalog lists HC7400SDS4H (PALL) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HC7400SKS4H page in verification queue | Pall | partial | MANN-FILTER's online catalog lists HC7400SKS4H (PALL) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HC7400SUS4H page in verification queue | Pall | partial | MANN-FILTER's online catalog lists HC7400SUS4H (PALL) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF30014 | Fleetguard | partial | MANN-FILTER's online catalog lists HF30014 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6117 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6117 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HP74L412MB page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HP74L412MB (HY-PRO) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P566921 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P566921 (DONALDSON) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ PF2000 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists PF2000 (AC DELCO) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ PF2004 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists PF2004 (AC DELCO) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SBF740042Z10B page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SBF740042Z10B (SCHROEDER) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SF-6630-MG | STAUFF | partial | MANN-FILTER's online catalog lists SF-6630MG (STAUFF) as a comparison number for WD10006. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the WD10006 model number is decoded
- WD10006MANN-FILTER hydraulic spin-on filter part number.
- 133 mmElement height (H).
- 94 mmOuter diameter (A).
- 1 1/2-16 UN-2BSpin-on mounting thread.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the WD10006 filter element?
The published envelope is 94 mm OD × 133 mm length (3.701 × 5.236 in). Confirm against the housing drawing before ordering.
What replaces the WD10006 filter element?
17 partial match(es) requiring parameter review
How do I read the WD10006 part number?
See the designation decoder above: each segment of WD10006 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 5 catalog element(s) share the 94×133 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the HD / WD Hydraulic series
All 880 →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.