MANN-FILTER · HD / WD Hydraulic · inline line
WD10008 filter element: specifications & equivalents
The WD10008 is a MANN-FILTER inline-line hydraulic filter element, sized 94 × 199 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 94 × 199 mm
Thread 1 1/2-16 UN-2B
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.92.
Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 94 mm |
| Length | 199 mm |
| Thread / connection | 1 1/2-16 UN-2B |
| End caps | spin-on baseplate with attached gasket |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | WD10008_MANN-FILTER |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-09-28 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.
Dimensions & series range
| Outside diameter | 94 mm (3.701 in) |
| Overall length | 199 mm (7.835 in) |
All 94×199 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 51202 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 51202 (WIX) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ BT372-10 | Baldwin Filters | partial | MANN-FILTER's online catalog lists BT372-10 (BALDWIN) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HC7400FUJ8H page in verification queue | Pall | partial | MANN-FILTER's online catalog lists HC7400FUJ8H (PALL) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HC7400SDS8H page in verification queue | Pall | partial | MANN-FILTER's online catalog lists HC7400SDS8H (PALL) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HC7400SUJ8H page in verification queue | Pall | partial | MANN-FILTER's online catalog lists HC7400SUJ8H (PALL) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HC9540SUJ8H page in verification queue | Pall | partial | MANN-FILTER's online catalog lists HC9540SUJ8H (PALL) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6103 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6103 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6104 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6104 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6105 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6105 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6128 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6128 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6169 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6169 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6601 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6601 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6601 | Fleetguard | partial | Fleetguard's online catalog lists WD10008 as an interchange for HF6601. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6611 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6611 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6613 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6613 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6621 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6621 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6641 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6641 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HY408W page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HY408W (HENGST) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ LFH4922 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists LFH4922 (LUBER-FINER) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P3755 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P3755 (FRAM) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P3959 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P3959 (FRAM) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P8024 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P8024 (FRAM) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SBF74008S7B page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SBF74008S7B (SCHROEDER) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-7400-8Z10B | Schroeder Industries | partial | MANN-FILTER's online catalog lists SBF74008Z10B (SCHROEDER) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH56691 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SH 56691 (HIFI-FILTER (JURA FILTRATION)) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WGH6104 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists WGH 6104 (WOODGATE) as a comparison number for WD10008. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the WD10008 model number is decoded
- WD10008MANN-FILTER hydraulic spin-on filter part number.
- 199 mmElement height (H).
- 94 mmOuter diameter (A).
- 1 1/2-16 UN-2BSpin-on mounting thread.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the WD10008 filter element?
The published envelope is 94 mm OD × 199 mm length (3.701 × 7.835 in). Confirm against the housing drawing before ordering.
What replaces the WD10008 filter element?
26 partial match(es) requiring parameter review
How do I read the WD10008 part number?
See the designation decoder above: each segment of WD10008 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 5 catalog element(s) share the 94×199 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the HD / WD Hydraulic series
All 880 →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.