MANN-FILTER · HD / WD Hydraulic · inline line
WD11002 filter element: specifications & equivalents
The WD11002 is a MANN-FILTER inline-line hydraulic filter element, sized 108 × 185 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 108 × 185 mm
Thread M40x2
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.92.
Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 108 mm |
| Length | 185 mm |
| Thread / connection | M40x2 |
| End caps | spin-on baseplate with attached gasket |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | WD11002_MANN-FILTER |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-09-28 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.
Dimensions & series range
| Outside diameter | 108 mm (4.252 in) |
| Overall length | 185 mm (7.283 in) |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ 51715 | WIX Filters | partial | MANN-FILTER's online catalog lists 51715 (WIX) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 8004200 page in verification queue | UFI | partial | MANN-FILTER's online catalog lists 80.042.00 (UFI) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ DO842 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists DO 842 (CLEAN) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ ESY8214 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists ESY8214 (MECAFILTER) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ FT4948 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists FT4948 (COOPERSFIAAM) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HC51040 page in verification queue | Pall | partial | MANN-FILTER's online catalog lists HC-51040 (SAKURA) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6350 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6350 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6350 | Fleetguard | partial | Fleetguard's online catalog lists WD11002 as an interchange for HF6350. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HP191 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HP191 (PZL SEDZISZOW) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HY831W page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HY831W (HENGST) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HZ012 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HZ012 (MISFAT) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ OL4481 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists OL 4481 (TECNECO) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P763987 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P763987 (DONALDSON) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ PH4481 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists PH4481 (FRAM) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ R415 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists R415 (TECNOCAR) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ S76795 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists S.76795 (SPAREX) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ S8042RH page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists S 8042 RH (SOFIMA) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH56400 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SH 56400 (HIFI-FILTER (JURA FILTRATION)) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SO8384HT page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SO8384HT (FILMAR) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SP804 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SP 804 (ASAS) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SPH9476 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SPH 9476 (SCHUPP / SF FILTER) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SY8003 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SY 8003 (SCT) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ VPK1534 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists VPK 1534 (VAPORMATIC) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WHS18123 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists WHS18123 (WISMET) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ ZP3022A page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists ZP 3022 A (FIL FILTER) as a comparison number for WD11002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the WD11002 model number is decoded
- WD11002MANN-FILTER hydraulic spin-on filter part number.
- 185 mmElement height (H).
- 108 mmOuter diameter (A).
- M40x2Spin-on mounting thread.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the WD11002 filter element?
The published envelope is 108 mm OD × 185 mm length (4.252 × 7.283 in). Confirm against the housing drawing before ordering.
What replaces the WD11002 filter element?
25 partial match(es) requiring parameter review
How do I read the WD11002 part number?
See the designation decoder above: each segment of WD11002 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Other models in the HD / WD Hydraulic series
All 880 →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.