MANN-FILTER · HD / WD Hydraulic · inline line
WD920 filter element: specifications & equivalents
The WD920 is a MANN-FILTER inline-line hydraulic filter element, sized 93 × 97 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 93 × 97 mm
Thread 3/4-16 UNF
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.92.
Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 93 mm |
| Length | 97 mm |
| Thread / connection | 3/4-16 UNF |
| End caps | spin-on baseplate with attached gasket |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | WD920_MANN-FILTER |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-09-28 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.
Dimensions & series range
| Outside diameter | 93 mm (3.661 in) |
| Overall length | 97 mm (3.819 in) |
All 93×97 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 1534721 page in verification queue | UFI | partial | MANN-FILTER's online catalog lists 1534721 (TRP DAF (TRUCK AND TRAILER)) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 8601200 page in verification queue | UFI | partial | MANN-FILTER's online catalog lists 86.012.00 (UFI) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ AW162 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists AW 162 (KNECHT) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ BT8301 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists BT8301 (BALDWIN) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ DGMH920 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists DGM/H 920 (DIGOEMA FILTER) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ F026407138 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists F 026 407 138 (BOSCH) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ H10WD01 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists H10WD01 (HENGST) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6164 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6164 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6446 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6446 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HI995 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HI 995 (UNICO) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HY10WD01 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HY10WD01 (HENGST) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ KL100034 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists KL100-034 (KELTEC) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ KL105021 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists KL105-021 (KELTEC) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ NO015380 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists NO 015380 (NOITECH) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ NO105080 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists NO 105080 (NOITECH) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ NO939320 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists NO-93/93.20 (ARMAFILT) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ OC104 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists OC 104 (MAHLE (KNECHT/MAHLE)) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P3761 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P3761 (FRAM) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P550210 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P550210 (DONALDSON) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P550940 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P550940 (DONALDSON) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ PER309 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists PER 309 (PUROLATOR) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ PH710 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists PH 710 (LUBER-FINER) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH8153 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SH8153 (SOTRAS) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SP812 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SP 812 (ASAS) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SPH21001 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SPH 21001 (SCHUPP / SF FILTER) as a comparison number for WD920. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the WD920 model number is decoded
- WD920MANN-FILTER hydraulic spin-on filter part number.
- 97 mmElement height (H).
- 93 mmOuter diameter (A).
- 3/4-16 UNFSpin-on mounting thread.
- 2.5Bypass valve opening pressure.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the WD920 filter element?
The published envelope is 93 mm OD × 97 mm length (3.661 × 3.819 in). Confirm against the housing drawing before ordering.
What replaces the WD920 filter element?
25 partial match(es) requiring parameter review
How do I read the WD920 part number?
See the designation decoder above: each segment of WD920 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 4 catalog element(s) share the 93×97 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the HD / WD Hydraulic series
All 880 →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.