MANN-FILTER · HD / WD Hydraulic · inline line
WDK962/20 filter element: specifications & equivalents
The WDK962/20 is a MANN-FILTER inline-line hydraulic filter element, sized 96 × 216 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 96 mm |
| Length | 216 mm |
| End caps | spin-on baseplate with attached gasket |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | WDK962/20_MANN-FILTER |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-09-28 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.
Dimensions & series range
| Outside diameter | 96 mm (3.780 in) |
| Overall length | 216 mm (8.504 in) |
All 96×216 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ ELG5664 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists ELG5664 (MECAFILTER) as a comparison number for WDK96220. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ FF5443 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists FF5443 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WDK96220. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ H648WK page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists H648WK (HENGST) as a comparison number for WDK96220. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ M744 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists M744 (MISFAT) as a comparison number for WDK96220. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ MO1037 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists MO 1037 (HIFI-FILTER (JURA FILTRATION)) as a comparison number for WDK96220. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SK48568 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SK 48568 (SCHUPP / SF FILTER) as a comparison number for WDK96220. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SN70392 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SN 70392 (HIFI-FILTER (JURA FILTRATION)) as a comparison number for WDK96220. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the WDK962/20 model number is decoded
- WDK962/20MANN-FILTER hydraulic spin-on filter part number.
- 216 mmElement height (H).
- 96 mmOuter diameter (A).
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the WDK962/20 filter element?
What replaces the WDK962/20 filter element?
How do I read the WDK962/20 part number?
Is a same-envelope aftermarket element always a drop-in replacement?
How often should a hydraulic return-line element be replaced?
Same-envelope elements from other brands
View full interchange →These 1 catalog element(s) share the 96×216 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the HD / WD Hydraulic series
All 880 →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.