Schroeder Industries · BestFit Elements · inline line

8TZ10V filter element: specifications & equivalents

Q: What are the dimensions of the 8TZ10V filter element?

The published envelope is 79 mm OD × 208 mm length with a 43 mm inside diameter (3.110 × 8.189 in × 1.693 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does 8TZ10V use?

This element is rated 10 µm (nominal class) — 10 µm at β(c) ≥ 1000 (99.9% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The 8TZ10V is a Schroeder Industries inline-line hydraulic filter element, built with excellement® z-media® (synthetic) media, sized 79 × 208 mm OD × length (ID 43 mm), rated at 10 µm class (10 µm at β(c) ≥ 1000 (99.9% efficiency)). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 79 × 208 mm

Inside diameter 43 mm

Filtration rating 10 µm nom.

Beta rating 10 µm at β(c) ≥ 1000 (99.9% efficiency)

Media Excellement® Z-Media® (Synthetic)

Collapse / burst 10.3 bar

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.

Dimensions, ratings and seal compound are taken from the Schroeder Industries online catalog. The nominal µm rating and the β200 absolute rating use different conventions — match the existing media grade before substituting; verify against the current Schroeder data sheet before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	Excellement® Z-Media® (Synthetic)
Filtration rating	10 µm
Rating basis	nominal
Beta ratio	10 µm at β(c) ≥ 1000 (99.9% efficiency)
Outside diameter OD	79 mm
Inside diameter ID	43 mm
Length	208 mm
End caps	open-ended cartridge element
Collapse / burst pressure	10.3 bar
Integral bypass valve	none (housing/valve-dependent)
Seal material	Fluorocarbon (Viton)
Operating temperature	-29 to 121 °C
Mass	450 g
Source catalog	Schroeder Industries: Schroeder Industries online catalog (catalog.schroederindustries.com)
Last verified	2026-09-28

Sources: Schroeder Industries — Schroeder Industries online catalog (catalog.schroederindustries.com) — accessed 2026-09-28.

Schroeder Industries® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Schroeder Industries distributor.

Dimensions & series range

Outside diameter	79 mm (3.110 in)
Inside diameter	43 mm (1.693 in)
Overall length	208 mm (8.189 in)

All 79×208 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 05.9600.12.200.10.E.V.8	Eaton / Internormen	partial	Schroeder online cross-reference (INTERNORMEN); envelope match — verify grade and seals.
↔ 07168896A page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MOOG); envelope match — verify grade and seals.
↔ 11108D12BNV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ 169600SH10SLE000V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (EPE); envelope match — verify grade and seals.
↔ 2061903 page in verification queue	UFI	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ 2960L12V08 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 2HF31H10SLA000V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (EPE); envelope match — verify grade and seals.
↔ 328985 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (WESTERN); envelope match — verify grade and seals.
↔ 383011006C page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HILCO); envelope match — verify grade and seals.
↔ 7783467 page in verification queue	UFI	partial	Schroeder online cross-reference (MAHLE); envelope match — verify grade and seals.
↔ 7834476 page in verification queue	UFI	partial	Schroeder online cross-reference (MAHLE); envelope match — verify grade and seals.
↔ 891017SM10 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MAHLE); envelope match — verify grade and seals.
↔ 8960DGKV08 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 8960L12V08 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 930115 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 9313322 page in verification queue	UFI	partial	Schroeder online cross-reference (PUROLATOR); envelope match — verify grade and seals.
↔ 932655 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 9326802 page in verification queue	UFI	partial	Schroeder online cross-reference (MAHLE); envelope match — verify grade and seals.
↔ 9600L101F2 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PUROLATOR); envelope match — verify grade and seals.
↔ 9600L122F2 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PUROLATOR); envelope match — verify grade and seals.
↔ AC9600FCS8Z page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ AC9600FUS8Z page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ B645752 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MOOG); envelope match — verify grade and seals.
↔ B645752A page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MOOG); envelope match — verify grade and seals.
↔ B645752V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MOOG); envelope match — verify grade and seals.
↔ BAU228V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ DE6020V2U10 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (DENISON); envelope match — verify grade and seals.
↔ DE6021V2C10 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (DENISON); envelope match — verify grade and seals.
↔ E6021V2C10 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (WESTERN); envelope match — verify grade and seals.
↔ FAU228V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ FC7006Q010VK page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ FD141C10AV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FRAM); envelope match — verify grade and seals.
↔ FD141G10AV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FRAM); envelope match — verify grade and seals.
↔ H96008010BN3V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ H96008010BNV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ H9608MDVL page in verification queue	Aftermarket	partial	Schroeder online cross-reference (POROUS MEDIA/FILTERSOFT); envelope match — verify grade and seals.
↔ HC9600FCS8Z	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9600FDS8Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9600FKS8Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9600FUS8Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9600FXS8Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HF3030KFV page in verification queue	Fleetguard	partial	Schroeder online cross-reference (PTI); envelope match — verify grade and seals.
↔ HF3110N page in verification queue	Fleetguard	partial	Schroeder online cross-reference (NORCO); envelope match — verify grade and seals.
↔ HF31L10VQ page in verification queue	Fleetguard	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ HYU228V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ PLU228V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ R960H0812HL page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FAIREY ARLON); envelope match — verify grade and seals.
↔ R960H0825HL page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FAIREY ARLON); envelope match — verify grade and seals.
↔ R960Z0812H page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ RFO37404 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NUOVO); envelope match — verify grade and seals.
↔ SCU228V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ SP-070-E-10-V	STAUFF	partial	Schroeder online cross-reference (STAUFF); envelope match — verify grade and seals.
↔ STU228V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ V6021V2C10	Eaton / Internormen	partial	Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals.
↔ V6021V2V10 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals.
↔ VIU228V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ WEU228V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

How the 8TZ10V model number is decoded

8TZ10VSchroeder BestFit filter element part number of the 8T housing-size family.
Excellement® Z-Media® (Synthetic)Filter media execution.
10 µmNominal filter rating as printed in the Schroeder catalog.
β≥1000Absolute rating: 10 µm particle size at β(c) ≥ 1000, 99.9% efficiency.
79 mmOuter diameter.
43 mmInner diameter.
208 mmElement height.
10.3 barElement collapse pressure rating.
Fluorocarbon (Viton)Seal compound.

Typical equipment & applications

Replacement element for Schroeder hydraulic and lube filter housings
Industrial and mobile hydraulic filtration

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the 8TZ10V filter element?

The published envelope is 79 mm OD × 208 mm length with a 43 mm inside diameter (3.110 × 8.189 in × 1.693 in ID). Confirm against the housing drawing before ordering.

What micron rating does 8TZ10V use?

This element is rated 10 µm (nominal class) — 10 µm at β(c) ≥ 1000 (99.9% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the 8TZ10V filter element?

57 partial match(es) requiring parameter review

How do I read the 8TZ10V part number?

See the designation decoder above: each segment of 8TZ10V encodes size, line type, filtration grade and media/collapse execution.

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

How often should a hydraulic return-line element be replaced?

Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.

Same-envelope elements from other brands

View full interchange →

These 32 catalog element(s) share the 79×208 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

HF7068 Fleetguard · 5.1 µm HF7069 Fleetguard HF7070 Fleetguard · 11.5 µm HF7071 Fleetguard · 20.9 µm HF7468 Fleetguard HF7470 Fleetguard HF7471 Fleetguard 8T10 Schroeder Industries · 10 µm 8T10V Schroeder Industries · 10 µm 8T25 Schroeder Industries · 25 µm

Other models in the BestFit Elements series

All 1082 →

10DVZ1 74×249 mm · 1 µm 10DVZ10 74×249 mm · 10 µm 10DVZ10V 74×249 mm · 10 µm 10DVZ25 74×249 mm · 25 µm 10DVZ3 74×249 mm · 3 µm 10DVZ5 74×249 mm · 5 µm 13HAS10 91×328 mm · 10 µm 13HASX10 91×328 mm · 10 µm 13HZ10 91×328 mm · 10 µm 13HZ10V 91×328 mm · 10 µm

Reviewed & verified by the ElementRef engineering desk against Schroeder Industries on 2026-09-28. Read our editorial & correction policy.