Schroeder Industries · BestFit Elements · inline line

8TZ5 filter element: specifications & equivalents

Q: What are the dimensions of the 8TZ5 filter element?

The published envelope is 79 mm OD × 208 mm length with a 43 mm inside diameter (3.110 × 8.189 in × 1.693 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does 8TZ5 use?

This element is rated 5 µm (nominal class) — 6.3 µm at β(c) ≥ 1000 (99.9% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The 8TZ5 is a Schroeder Industries inline-line hydraulic filter element, built with excellement® z-media® (synthetic) media, sized 79 × 208 mm OD × length (ID 43 mm), rated at 5 µm class (6.3 µm at β(c) ≥ 1000 (99.9% efficiency)). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 79 × 208 mm

Inside diameter 43 mm

Filtration rating 5 µm nom.

Beta rating 6.3 µm at β(c) ≥ 1000 (99.9% efficiency)

Media Excellement® Z-Media® (Synthetic)

Collapse / burst 10.3 bar

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.

Dimensions, ratings and seal compound are taken from the Schroeder Industries online catalog. The nominal µm rating and the β200 absolute rating use different conventions — match the existing media grade before substituting; verify against the current Schroeder data sheet before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	Excellement® Z-Media® (Synthetic)
Filtration rating	5 µm
Rating basis	nominal
Beta ratio	6.3 µm at β(c) ≥ 1000 (99.9% efficiency)
Outside diameter OD	79 mm
Inside diameter ID	43 mm
Length	208 mm
End caps	open-ended cartridge element
Collapse / burst pressure	10.3 bar
Integral bypass valve	none (housing/valve-dependent)
Seal material	Nitrile (Buna-N)
Operating temperature	-29 to 107 °C
Mass	450 g
Source catalog	Schroeder Industries: Schroeder Industries online catalog (catalog.schroederindustries.com)
Last verified	2026-09-28

Sources: Schroeder Industries — Schroeder Industries online catalog (catalog.schroederindustries.com) — accessed 2026-09-28.

Schroeder Industries® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Schroeder Industries distributor.

Dimensions & series range

Outside diameter	79 mm (3.110 in)
Inside diameter	43 mm (1.693 in)
Overall length	208 mm (8.189 in)

All 79×208 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 05.9600.6VG.10.E.P.8	Eaton / Internormen	partial	Schroeder online cross-reference (INTERNORMEN); envelope match — verify grade and seals.
↔ 1683 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NAPA); envelope match — verify grade and seals.
↔ 169600H6LL205SP page in verification queue	Aftermarket	partial	Schroeder online cross-reference (EPE); envelope match — verify grade and seals.
↔ 169600SH6SLE000P page in verification queue	Aftermarket	partial	Schroeder online cross-reference (EPE); envelope match — verify grade and seals.
↔ 2060600 page in verification queue	UFI	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ 2960L06B08 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 2HF31H6SLA000P page in verification queue	Aftermarket	partial	Schroeder online cross-reference (EPE); envelope match — verify grade and seals.
↔ 301070 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (ATICO); envelope match — verify grade and seals.
↔ 3010706VG page in verification queue	Aftermarket	partial	Schroeder online cross-reference (INTERNORMEN); envelope match — verify grade and seals.
↔ 383012109C page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HILCO); envelope match — verify grade and seals.
↔ 47551 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (F.B.O.); envelope match — verify grade and seals.
↔ 8960DGGB08 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 8960L06B08 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 92683 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (BIG A); envelope match — verify grade and seals.
↔ 926843Q	Parker	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 932652 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 932652Q page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 9600L051N2 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PUROLATOR); envelope match — verify grade and seals.
↔ 9600L062N2 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PUROLATOR); envelope match — verify grade and seals.
↔ 96086 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NATIONAL FILTER); envelope match — verify grade and seals.
↔ AC9600FCN8H page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ AC9600FUN8H page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ BAU227 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ BE9600806A page in verification queue	Aftermarket	partial	Schroeder online cross-reference (BEHRINGER); envelope match — verify grade and seals.
↔ C926717 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (COMMERCIAL); envelope match — verify grade and seals.
↔ CH802FC11 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SOFIMA); envelope match — verify grade and seals.
↔ DE6021B2C05 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (DENISON); envelope match — verify grade and seals.
↔ E6021B2C05 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (WESTERN); envelope match — verify grade and seals.
↔ FAU227 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ FC7006Q005BK page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ FD141G06A page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FRAM); envelope match — verify grade and seals.
↔ FSH46M page in verification queue	Aftermarket	partial	Schroeder online cross-reference (TAISEI KOGYO); envelope match — verify grade and seals.
↔ G01977 page in verification queue	Parker	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ G02762 page in verification queue	Parker	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ GSH46M page in verification queue	Aftermarket	partial	Schroeder online cross-reference (TAISEI KOGYO); envelope match — verify grade and seals.
↔ H8074 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (BALDWIN); envelope match — verify grade and seals.
↔ H96008005BN page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ H96008005BN3 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ H9608MCBL page in verification queue	Aftermarket	partial	Schroeder online cross-reference (POROUS MEDIA/FILTERSOFT); envelope match — verify grade and seals.
↔ HC9600FCN8H	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9600FDN8H page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9600FKN8H	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9600FUN8H page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9600FXN8H page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HD846/1	MANN-FILTER	partial	MANN-FILTER's online catalog lists 8TZ5 (SCHROEDER) as a comparison number for HD8461. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ HF30084	Fleetguard	partial	Fleetguard's online catalog lists 8TZ5 as an interchange for HF30084. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ HF3030HFB page in verification queue	Fleetguard	partial	Schroeder online cross-reference (PTI); envelope match — verify grade and seals.
↔ HYU22 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ MF0058756 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MAIN FILTER INC); envelope match — verify grade and seals.
↔ MF0128266 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MAIN FILTER INC); envelope match — verify grade and seals.
↔ P164594 page in verification queue	Donaldson	partial	Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals.
↔ PFSH46M page in verification queue	Aftermarket	partial	Schroeder online cross-reference (TAISEI KOGYO); envelope match — verify grade and seals.
↔ PGSH46M page in verification queue	Aftermarket	partial	Schroeder online cross-reference (TAISEI KOGYO); envelope match — verify grade and seals.
↔ PLU226 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ PR2762Q page in verification queue	Parker	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ PSH46M page in verification queue	Aftermarket	partial	Schroeder online cross-reference (TAISEI KOGYO); envelope match — verify grade and seals.
↔ PTU226 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ R960H0806A page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FAIREY ARLON); envelope match — verify grade and seals.
↔ R960Z0806A page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FAIREY ARLON); envelope match — verify grade and seals.
↔ SCU226 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ SH46M page in verification queue	Aftermarket	partial	Schroeder online cross-reference (TAISEI KOGYO); envelope match — verify grade and seals.
↔ SP-070-E-05-B	STAUFF	partial	Schroeder online cross-reference (STAUFF); envelope match — verify grade and seals.
↔ STU226 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ V6021B2C05 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals.
↔ V6021B2V05 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals.
↔ VIU226 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ W0806L page in verification queue	Aftermarket	partial	Schroeder online cross-reference (ZINGA); envelope match — verify grade and seals.
↔ W0806LN page in verification queue	Aftermarket	partial	Schroeder online cross-reference (ZINGA); envelope match — verify grade and seals.
↔ WEU226 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

How the 8TZ5 model number is decoded

8TZ5Schroeder BestFit filter element part number of the 8T housing-size family.
Excellement® Z-Media® (Synthetic)Filter media execution.
5 µmNominal filter rating as printed in the Schroeder catalog.
β≥1000Absolute rating: 6.3 µm particle size at β(c) ≥ 1000, 99.9% efficiency.
79 mmOuter diameter.
43 mmInner diameter.
208 mmElement height.
10.3 barElement collapse pressure rating.
Nitrile (Buna-N)Seal compound.

Typical equipment & applications

Replacement element for Schroeder hydraulic and lube filter housings
Industrial and mobile hydraulic filtration

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
Fine 5 µm media loads faster and runs at a higher cold Δp than coarser grades — only downgrade cleanliness targets if the system ISO 4406 code allows it.
End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the 8TZ5 filter element?

The published envelope is 79 mm OD × 208 mm length with a 43 mm inside diameter (3.110 × 8.189 in × 1.693 in ID). Confirm against the housing drawing before ordering.

What micron rating does 8TZ5 use?

This element is rated 5 µm (nominal class) — 6.3 µm at β(c) ≥ 1000 (99.9% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the 8TZ5 filter element?

69 partial match(es) requiring parameter review

How do I read the 8TZ5 part number?

See the designation decoder above: each segment of 8TZ5 encodes size, line type, filtration grade and media/collapse execution.

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

How often should a hydraulic return-line element be replaced?

Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.

Same-envelope elements from other brands

View full interchange →

These 32 catalog element(s) share the 79×208 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

HF7068 Fleetguard · 5.1 µm HF7069 Fleetguard HF7070 Fleetguard · 11.5 µm HF7071 Fleetguard · 20.9 µm HF7468 Fleetguard HF7470 Fleetguard HF7471 Fleetguard 8T10 Schroeder Industries · 10 µm 8T10V Schroeder Industries · 10 µm 8T25 Schroeder Industries · 25 µm

Other models in the BestFit Elements series

All 1082 →

10DVZ1 74×249 mm · 1 µm 10DVZ10 74×249 mm · 10 µm 10DVZ10V 74×249 mm · 10 µm 10DVZ25 74×249 mm · 25 µm 10DVZ3 74×249 mm · 3 µm 10DVZ5 74×249 mm · 5 µm 13HAS10 91×328 mm · 10 µm 13HASX10 91×328 mm · 10 µm 13HZ10 91×328 mm · 10 µm 13HZ10V 91×328 mm · 10 µm

Reviewed & verified by the ElementRef engineering desk against Schroeder Industries on 2026-09-28. Read our editorial & correction policy.