Schroeder Industries · BestFit Elements · inline line

8TZX10V filter element: specifications & equivalents

Q: What are the dimensions of the 8TZX10V filter element?

The published envelope is 81 mm OD × 208 mm length with a 43 mm inside diameter (3.189 × 8.189 in × 1.693 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does 8TZX10V use?

This element is rated 10 µm (nominal class) — 10 µm at β(c) ≥ 1000 (99.9% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The 8TZX10V is a Schroeder Industries inline-line hydraulic filter element, built with excellement® z-media® (synthetic) media, sized 81 × 208 mm OD × length (ID 43 mm), rated at 10 µm class (10 µm at β(c) ≥ 1000 (99.9% efficiency)). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 81 × 208 mm

Inside diameter 43 mm

Filtration rating 10 µm nom.

Beta rating 10 µm at β(c) ≥ 1000 (99.9% efficiency)

Media Excellement® Z-Media® (Synthetic)

Collapse / burst 207 bar

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.

Dimensions, ratings and seal compound are taken from the Schroeder Industries online catalog. The nominal µm rating and the β200 absolute rating use different conventions — match the existing media grade before substituting; verify against the current Schroeder data sheet before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	Excellement® Z-Media® (Synthetic)
Filtration rating	10 µm
Rating basis	nominal
Beta ratio	10 µm at β(c) ≥ 1000 (99.9% efficiency)
Outside diameter OD	81 mm
Inside diameter ID	43 mm
Length	208 mm
End caps	open-ended cartridge element
Collapse / burst pressure	207 bar
Integral bypass valve	none (housing/valve-dependent)
Seal material	Fluorocarbon (Viton)
Operating temperature	-29 to 121 °C
Mass	1270 g
Source catalog	Schroeder Industries: Schroeder Industries online catalog (catalog.schroederindustries.com)
Last verified	2026-09-28

Sources: Schroeder Industries — Schroeder Industries online catalog (catalog.schroederindustries.com) — accessed 2026-09-28.

Schroeder Industries® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Schroeder Industries distributor.

Dimensions & series range

Outside diameter	81 mm (3.189 in)
Inside diameter	43 mm (1.693 in)
Overall length	208 mm (8.189 in)

All 81×208 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 05.9601.12.200.210.E.V.8	Eaton / Internormen	partial	Schroeder online cross-reference (INTERNORMEN); envelope match — verify grade and seals.
↔ 05960125VG210EV8 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (INTERNORMEN); envelope match — verify grade and seals.
↔ 07160260A page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MOOG); envelope match — verify grade and seals.
↔ 07160260N page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MOOG); envelope match — verify grade and seals.
↔ 11108D17BHV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ 2063333 page in verification queue	UFI	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ 2HF31H10SLC000V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (EPE); envelope match — verify grade and seals.
↔ 2HF31H20SLC000V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (EPE); envelope match — verify grade and seals.
↔ 380L210H page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 7783574 page in verification queue	UFI	partial	Schroeder online cross-reference (MAHLE); envelope match — verify grade and seals.
↔ 7835408 page in verification queue	UFI	partial	Schroeder online cross-reference (MAHLE); envelope match — verify grade and seals.
↔ 891017SMVST10 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MAHLE); envelope match — verify grade and seals.
↔ 891017SMVST25 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MAHLE); envelope match — verify grade and seals.
↔ 891017SMXVST16FPM page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MAHLE); envelope match — verify grade and seals.
↔ 8960H15V08 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 927178Q page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 9314810 page in verification queue	UFI	partial	Schroeder online cross-reference (PUROLATOR); envelope match — verify grade and seals.
↔ AC9601FDT8Z page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ AC9601FUT8Z page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ B645692 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MOOG); envelope match — verify grade and seals.
↔ B645692A page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MOOG); envelope match — verify grade and seals.
↔ B645692V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MOOG); envelope match — verify grade and seals.
↔ BAU181V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ BE9601812A page in verification queue	Aftermarket	partial	Schroeder online cross-reference (BEHRINGER); envelope match — verify grade and seals.
↔ C927175 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (COMMERCIAL); envelope match — verify grade and seals.
↔ C927178 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (COMMERCIAL); envelope match — verify grade and seals.
↔ DE6021V2U25 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (DENISON); envelope match — verify grade and seals.
↔ DE6024V2H10 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (DENISON); envelope match — verify grade and seals.
↔ E6021V2U25 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (WESTERN); envelope match — verify grade and seals.
↔ E6024V2H10 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (WESTERN); envelope match — verify grade and seals.
↔ FAU181V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ FC7006A010VS page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ FD141G10BV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FRAM); envelope match — verify grade and seals.
↔ FD141G25BV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FRAM); envelope match — verify grade and seals.
↔ H96018010BH3V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ H96018010BHV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ H96018020VH page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYCON); envelope match — verify grade and seals.
↔ H9608MDVH page in verification queue	Aftermarket	partial	Schroeder online cross-reference (POROUS MEDIA/FILTERSOFT); envelope match — verify grade and seals.
↔ HC9601FCS8Z	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9601FDS8Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9601FKS8Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9601FUS8Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9601FXS8Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HF31H10VQ page in verification queue	Fleetguard	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ HF31H20VQ page in verification queue	Fleetguard	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ HF3HC110B page in verification queue	Fleetguard	partial	Schroeder online cross-reference (NORCO); envelope match — verify grade and seals.
↔ HF3HC110F page in verification queue	Fleetguard	partial	Schroeder online cross-reference (NORCO); envelope match — verify grade and seals.
↔ HF3HC110N page in verification queue	Fleetguard	partial	Schroeder online cross-reference (NORCO); envelope match — verify grade and seals.
↔ HYU181V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ P167186	Donaldson	partial	Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals.
↔ R961H0812HL page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FAIREY ARLON); envelope match — verify grade and seals.
↔ R961Z0815H page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ SCU181V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ SP-070-F-10-V	STAUFF	partial	Schroeder online cross-reference (STAUFF); envelope match — verify grade and seals.
↔ U181V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ V6023V2H10 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals.
↔ V6024V2H10 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals.
↔ V6024V2V20 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

How the 8TZX10V model number is decoded

8TZX10VSchroeder BestFit filter element part number of the 8T housing-size family.
Excellement® Z-Media® (Synthetic)Filter media execution.
10 µmNominal filter rating as printed in the Schroeder catalog.
β≥1000Absolute rating: 10 µm particle size at β(c) ≥ 1000, 99.9% efficiency.
81 mmOuter diameter.
43 mmInner diameter.
208 mmElement height.
207 barElement collapse pressure rating.
Fluorocarbon (Viton)Seal compound.

Typical equipment & applications

Replacement element for Schroeder hydraulic and lube filter housings
Industrial and mobile hydraulic filtration

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the 8TZX10V filter element?

The published envelope is 81 mm OD × 208 mm length with a 43 mm inside diameter (3.189 × 8.189 in × 1.693 in ID). Confirm against the housing drawing before ordering.

What micron rating does 8TZX10V use?

This element is rated 10 µm (nominal class) — 10 µm at β(c) ≥ 1000 (99.9% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the 8TZX10V filter element?

58 partial match(es) requiring parameter review

How do I read the 8TZX10V part number?

See the designation decoder above: each segment of 8TZX10V encodes size, line type, filtration grade and media/collapse execution.

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

How often should a hydraulic return-line element be replaced?

Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.

Same-envelope elements from other brands

View full interchange →

These 8 catalog element(s) share the 81×208 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

8TZX10 Schroeder Industries · 10 µm 8TZX1V Schroeder Industries · 1 µm 8TZX25 Schroeder Industries · 25 µm 8TZX25V Schroeder Industries · 25 µm 8TZX3 Schroeder Industries · 3 µm 8TZX3V Schroeder Industries · 3 µm 8TZX5 Schroeder Industries · 5 µm 8TZX5V Schroeder Industries · 5 µm

Other models in the BestFit Elements series

All 1082 →

10DVZ1 74×249 mm · 1 µm 10DVZ10 74×249 mm · 10 µm 10DVZ10V 74×249 mm · 10 µm 10DVZ25 74×249 mm · 25 µm 10DVZ3 74×249 mm · 3 µm 10DVZ5 74×249 mm · 5 µm 13HAS10 91×328 mm · 10 µm 13HASX10 91×328 mm · 10 µm 13HZ10 91×328 mm · 10 µm 13HZ10V 91×328 mm · 10 µm

Reviewed & verified by the ElementRef engineering desk against Schroeder Industries on 2026-09-28. Read our editorial & correction policy.