Schroeder Industries · BestFit Elements · inline line
A10 filter element: specifications & equivalents
The A10 is a Schroeder Industries inline-line hydraulic filter element, built with e media (cellulose) media, sized 76 × 119 mm OD × length (ID 28 mm), rated at 10 µm class (18 µm at β(c) ≥ 200 (99.5% efficiency)). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 76 × 119 mm
Inside diameter 28 mm
Filtration rating 10 µm nom.
Beta rating 18 µm at β(c) ≥ 200 (99.5% efficiency)
Media E Media (Cellulose)
Collapse / burst 10.3 bar
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.
Dimensions, ratings and seal compound are taken from the Schroeder Industries online catalog. The nominal µm rating and the β200 absolute rating use different conventions — match the existing media grade before substituting; verify against the current Schroeder data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | E Media (Cellulose) |
| Filtration rating | 10 µm |
| Rating basis | nominal |
| Beta ratio | 18 µm at β(c) ≥ 200 (99.5% efficiency) |
| Outside diameter OD | 76 mm |
| Inside diameter ID | 28 mm |
| Length | 119 mm |
| End caps | open-ended cartridge element |
| Collapse / burst pressure | 10.3 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Seal material | Nitrile (Buna-N) |
| Operating temperature | -29 to 107 °C |
| Mass | 270 g |
| Source catalog | Schroeder Industries: Schroeder Industries online catalog (catalog.schroederindustries.com) |
| Last verified | 2026-09-28 |
Sources: Schroeder Industries — Schroeder Industries online catalog (catalog.schroederindustries.com) — accessed 2026-09-28.
Schroeder Industries® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Schroeder Industries distributor.
Dimensions & series range
| Outside diameter | 76 mm (2.992 in) |
| Inside diameter | 28 mm (1.102 in) |
| Overall length | 119 mm (4.685 in) |
All 76×119 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 2060912 page in verification queue | UFI | partial | Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals. |
|
↔ 2060920 page in verification queue | UFI | partial | Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals. |
|
↔ 4080AP page in verification queue | Aftermarket | partial | Schroeder online cross-reference (FILTER STORE); envelope match — verify grade and seals. |
| ↔ 5.01.05 R 10 P | HYDAC | partial | Schroeder online cross-reference (HYCON); envelope match — verify grade and seals. |
| ↔ 51682 | WIX Filters | partial | Schroeder online cross-reference (WIX); envelope match — verify grade and seals. |
|
↔ 658106 page in verification queue | Aftermarket | partial | Schroeder online cross-reference (FLOW-EZY); envelope match — verify grade and seals. |
|
↔ 756406 page in verification queue | Aftermarket | partial | Schroeder online cross-reference (FLOW-EZY); envelope match — verify grade and seals. |
| ↔ 926567 | Parker | partial | Schroeder online cross-reference (PARKER); envelope match — verify grade and seals. |
|
↔ BEA510N page in verification queue | Aftermarket | partial | Schroeder online cross-reference (BEHRINGER); envelope match — verify grade and seals. |
|
↔ C926567 page in verification queue | Aftermarket | partial | Schroeder online cross-reference (COMMERCIAL); envelope match — verify grade and seals. |
|
↔ DLU1006 page in verification queue | Aftermarket | partial | Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals. |
|
↔ HA010BN page in verification queue | Aftermarket | partial | Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals. |
|
↔ HA010BN3 page in verification queue | Aftermarket | partial | Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals. |
|
↔ HA025BN page in verification queue | Aftermarket | partial | Schroeder online cross-reference (HYCON); envelope match — verify grade and seals. |
|
↔ HC9730FDS5H page in verification queue | Pall | partial | Schroeder online cross-reference (PALL); envelope match — verify grade and seals. |
|
↔ HC9730FUS5H page in verification queue | Pall | partial | Schroeder online cross-reference (PALL); envelope match — verify grade and seals. |
| ↔ HF6222 | Fleetguard | partial | Fleetguard's online catalog lists A10 as an interchange for HF6222. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HPAL512M page in verification queue | Aftermarket | partial | Schroeder online cross-reference (MP FILTRI); envelope match — verify grade and seals. |
|
↔ HPAL512MB page in verification queue | Aftermarket | partial | Schroeder online cross-reference (HY-PRO); envelope match — verify grade and seals. |
|
↔ MP69707 page in verification queue | MP Filtri | partial | Schroeder online cross-reference (MP FILTRI); envelope match — verify grade and seals. |
|
↔ P154816 page in verification queue | Donaldson | partial | Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals. |
|
↔ P167552 page in verification queue | Donaldson | partial | Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals. |
|
↔ P300510B7 page in verification queue | Donaldson | partial | Schroeder online cross-reference (FLUITEK); envelope match — verify grade and seals. |
|
↔ PRU1006 page in verification queue | Parker | partial | Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals. |
| ↔ PT727-HD10 | Baldwin Filters | partial | Schroeder online cross-reference (BALDWIN); envelope match — verify grade and seals. |
|
↔ SCU1006 page in verification queue | Aftermarket | partial | Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals. |
|
↔ ST6222 page in verification queue | Aftermarket | partial | Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the A10 model number is decoded
- A10Schroeder BestFit filter element part number of the A housing-size family.
- E Media (Cellulose)Filter media execution.
- 10 µmNominal filter rating as printed in the Schroeder catalog.
- β≥200Absolute rating: 18 µm particle size at β(c) ≥ 200, 99.5% efficiency.
- 76 mmOuter diameter.
- 28 mmInner diameter.
- 119 mmElement height.
- 10.3 barElement collapse pressure rating.
- Nitrile (Buna-N)Seal compound.
Typical equipment & applications
- Replacement element for Schroeder hydraulic and lube filter housings
- Industrial and mobile hydraulic filtration
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the A10 filter element?
The published envelope is 76 mm OD × 119 mm length with a 28 mm inside diameter (2.992 × 4.685 in × 1.102 in ID). Confirm against the housing drawing before ordering.
What micron rating does A10 use?
This element is rated 10 µm (nominal class) — 18 µm at β(c) ≥ 200 (99.5% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the A10 filter element?
27 partial match(es) requiring parameter review
How do I read the A10 part number?
See the designation decoder above: each segment of A10 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 2 catalog element(s) share the 76×119 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the BestFit Elements series
All 1082 →Reviewed & verified by the ElementRef engineering desk against Schroeder Industries on 2026-09-28. Read our editorial & correction policy.