Schroeder Industries · BestFit Elements · inline line

K10V filter element: specifications & equivalents

Q: What are the dimensions of the K10V filter element?

The published envelope is 102 mm OD × 236 mm length with a 43 mm inside diameter (4.016 × 9.291 in × 1.693 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does K10V use?

This element is rated 10 µm (nominal class) — 18 µm at β(c) ≥ 200 (99.5% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The K10V is a Schroeder Industries inline-line hydraulic filter element, built with e media (cellulose) media, sized 102 × 236 mm OD × length (ID 43 mm), rated at 10 µm class (18 µm at β(c) ≥ 200 (99.5% efficiency)). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 102 × 236 mm

Inside diameter 43 mm

Filtration rating 10 µm nom.

Beta rating 18 µm at β(c) ≥ 200 (99.5% efficiency)

Media E Media (Cellulose)

Collapse / burst 10.3 bar

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.

Dimensions, ratings and seal compound are taken from the Schroeder Industries online catalog. The nominal µm rating and the β200 absolute rating use different conventions — match the existing media grade before substituting; verify against the current Schroeder data sheet before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	E Media (Cellulose)
Filtration rating	10 µm
Rating basis	nominal
Beta ratio	18 µm at β(c) ≥ 200 (99.5% efficiency)
Outside diameter OD	102 mm
Inside diameter ID	43 mm
Length	236 mm
End caps	open-ended cartridge element
Collapse / burst pressure	10.3 bar
Integral bypass valve	none (housing/valve-dependent)
Seal material	Fluorocarbon (Viton)
Operating temperature	-29 to 121 °C
Mass	640 g
Source catalog	Schroeder Industries: Schroeder Industries online catalog (catalog.schroederindustries.com)
Last verified	2026-09-28

Sources: Schroeder Industries — Schroeder Industries online catalog (catalog.schroederindustries.com) — accessed 2026-09-28.

Schroeder Industries® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Schroeder Industries distributor.

Dimensions & series range

Outside diameter	102 mm (4.016 in)
Inside diameter	43 mm (1.693 in)
Overall length	236 mm (9.291 in)

All 102×236 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 4069AP page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FILTER STORE); envelope match — verify grade and seals.
↔ 5.03.09 D 10 P /-V	HYDAC	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ 658310 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FLOW-EZY); envelope match — verify grade and seals.
↔ 756510 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FLOW-EZY); envelope match — verify grade and seals.
↔ 818ACC10CV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 925520	Parker	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 925782 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 926476 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ DLU895V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ E0250VT10 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (WESTERN); envelope match — verify grade and seals.
↔ HF4050CCV page in verification queue	Fleetguard	partial	Schroeder online cross-reference (PTI); envelope match — verify grade and seals.
↔ HK010PV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ HPKL912MV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HY-PRO); envelope match — verify grade and seals.
↔ HYU953V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ MF0342861 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MAIN FILTER INC); envelope match — verify grade and seals.
↔ P167410 page in verification queue	Donaldson	partial	Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals.
↔ PT707-HD10	Baldwin Filters	partial	Schroeder online cross-reference (BALDWIN); envelope match — verify grade and seals.
↔ PTU895V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ SCU895V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ V4051V3C10	Eaton / Internormen	partial	Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals.
↔ V4051V3V10 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

How the K10V model number is decoded

K10VSchroeder BestFit filter element part number of the K housing-size family.
E Media (Cellulose)Filter media execution.
10 µmNominal filter rating as printed in the Schroeder catalog.
β≥200Absolute rating: 18 µm particle size at β(c) ≥ 200, 99.5% efficiency.
102 mmOuter diameter.
43 mmInner diameter.
236 mmElement height.
10.3 barElement collapse pressure rating.
Fluorocarbon (Viton)Seal compound.

Typical equipment & applications

Replacement element for Schroeder hydraulic and lube filter housings
Industrial and mobile hydraulic filtration

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the K10V filter element?

The published envelope is 102 mm OD × 236 mm length with a 43 mm inside diameter (4.016 × 9.291 in × 1.693 in ID). Confirm against the housing drawing before ordering.

What micron rating does K10V use?

This element is rated 10 µm (nominal class) — 18 µm at β(c) ≥ 200 (99.5% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the K10V filter element?

21 partial match(es) requiring parameter review

How do I read the K10V part number?

See the designation decoder above: each segment of K10V encodes size, line type, filtration grade and media/collapse execution.

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

How often should a hydraulic return-line element be replaced?

Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.

Same-envelope elements from other brands

View full interchange →

These 3 catalog element(s) share the 102×236 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

03.1.361.10VG.16.B.P Eaton / Internormen · 10 µm 03.1.361.25G.16.B.P Eaton / Internormen HF35539 Fleetguard · 32.7 µm

Other models in the BestFit Elements series

All 1082 →

10DVZ1 74×249 mm · 1 µm 10DVZ10 74×249 mm · 10 µm 10DVZ10V 74×249 mm · 10 µm 10DVZ25 74×249 mm · 25 µm 10DVZ3 74×249 mm · 3 µm 10DVZ5 74×249 mm · 5 µm 13HAS10 91×328 mm · 10 µm 13HASX10 91×328 mm · 10 µm 13HZ10 91×328 mm · 10 µm 13HZ10V 91×328 mm · 10 µm

Reviewed & verified by the ElementRef engineering desk against Schroeder Industries on 2026-09-28. Read our editorial & correction policy.