STAUFF · Replacement Elements · inline line
RP-020-E-10-B filter element: specifications & equivalents
The RP-020-E-10-B is a STAUFF inline-line hydraulic filter element, sized 78 × 328 mm OD × length (ID 41.5 mm). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 78 × 328 mm
Inside diameter 41.5 mm
Line type inline
Partially verified. Fit and grade trace to an official interchange document;
dimensional values are compiled from 0 aftermarket listing(s)
and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.
Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 78 mm |
| Inside diameter ID | 41.5 mm |
| Length | 328 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Source catalog | STAUFF: STAUFF Filter Interchange online database (filterinterchange.com) |
| Last verified | 2026-09-28 |
Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.
STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.
Dimensions & series range
| Outside diameter | 78 mm (3.071 in) |
| Inside diameter | 41.5 mm (1.634 in) |
| Overall length | 328 mm (12.913 in) |
All 78×328 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 166300TH10SLS000P page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists 16.6300TH10SLS000P (EPE / Bosch-Rexroth Filtration) as replaced by RP-020-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 166300TH10XLS000M page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists 16.6300/T H10XL-S00-0-M (EPE / Bosch-Rexroth Filtration) as replaced by RP-020-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 166300TH10XLS000P page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists 16.6300TH10XLS000P (EPE / Bosch-Rexroth Filtration) as replaced by RP-020-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ FC1332F010BS page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists FC1332F010BS (FINNFILTER) as replaced by RP-020-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ FC1332Q010BS page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists FC1332Q010BS (FINNFILTER) as replaced by RP-020-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ HC6300FUS13H page in verification queue | Pall | partial | STAUFF Filter Interchange lists HC6300FUS13H (PALL) as replaced by RP-020-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
| ↔ HF30357 | Fleetguard | partial | Fleetguard's online catalog lists RP020E10B as an interchange for HF30357. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HY20006 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists HY 20006 (SF-FILTER) as replaced by RP-020-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the RP-020-E-10-B model number is decoded
- RP-020-E-10-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the RP-020-E-10-B filter element?
The published envelope is 78 mm OD × 328 mm length with a 41.5 mm inside diameter (3.071 × 12.913 in × 1.634 in ID). Confirm against the housing drawing before ordering.
What replaces the RP-020-E-10-B filter element?
8 partial match(es) requiring parameter review
How do I read the RP-020-E-10-B part number?
See the designation decoder above: each segment of RP020E10B encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 6 catalog element(s) share the 78×328 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Replacement Elements series
All 4930 → AD-030-B-125-B AD-030-B-40-B AD-030-B-60-B AD-030-B-80-B AD-030-E-20-B AD-033-B-40-B AD-033-B-60-B AD-033-B-80-B AD-033-E-10-B BL-200-E-10-B
Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.