STAUFF · Replacement Elements · inline line
SFCT-5710-E filter element: specifications & equivalents
The SFCT-5710-E is a STAUFF inline-line hydraulic filter element, sized 132 × 180 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 132 × 180 mm
Line type inline
Partially verified. Fit and grade trace to an official interchange document;
dimensional values are compiled from 0 aftermarket listing(s)
and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.
Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 132 mm |
| Length | 180 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Source catalog | STAUFF: STAUFF Filter Interchange online database (filterinterchange.com) |
| Last verified | 2026-09-28 |
Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.
STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.
Dimensions & series range
| Outside diameter | 132 mm (5.197 in) |
| Overall length | 180 mm (7.087 in) |
All 132×180 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 1303019 page in verification queue | UFI | partial | STAUFF Filter Interchange lists 1303019 (RCM) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 32901401 page in verification queue | UFI | partial | STAUFF Filter Interchange lists 32901401 (JCB) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ A220C10BM page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists A220C10BM (FILTREC) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ A220C25BM page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists A220C25BM (FILTREC) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ BT8450 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists BT 8450 (BALDWIN) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ CA301ECD1M page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists CA301ECD1M (SOFIMA) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ CT100P10A page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists CT100P10A (MP-FILTRI) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ CT100P10AB page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists CT 100 P10AB (MP-FILTRI) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ CTT100P10 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists CTT 100/P10 (MP-FILTRI) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ CTT100P10A page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists CTT100P10A (MP-FILTRI) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ CTT100P10N page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists CTT100P10N (MP-FILTRI) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ FC1052N010BS16 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists FC1052N010BS16 (FINNFILTER) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ FDB34P10 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists FDB 34/P10 (DOMANGE) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
| ↔ HF6177 | Fleetguard | partial | Fleetguard's online catalog lists SFCT5710E as an interchange for HF6177. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF7980 | Fleetguard | partial | Fleetguard's online catalog lists SFCT5710E as an interchange for HF7980. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P550269 page in verification queue | Donaldson | partial | STAUFF Filter Interchange lists P 55-0269 (DONALDSON) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ TTE3010 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists TTE 30-10 (LHA) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the SFCT-5710-E model number is decoded
- SFCT-5710-ESTAUFF replacement element part number per the STAUFF Filter Interchange database.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the SFCT-5710-E filter element?
The published envelope is 132 mm OD × 180 mm length (5.197 × 7.087 in). Confirm against the housing drawing before ordering.
What replaces the SFCT-5710-E filter element?
17 partial match(es) requiring parameter review
How do I read the SFCT-5710-E part number?
See the designation decoder above: each segment of SFCT5710E encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 10 catalog element(s) share the 132×180 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
SFC-5703-AE SFC-5710-AE SFC-5710-E SFC-57125-E SFC-5725-AE SFC-5725-E SFC-5760-E SFCT-5710-AE SFCT-5725-AE SFCT-5725-E
Other models in the Replacement Elements series
All 4930 → AD-030-B-125-B AD-030-B-40-B AD-030-B-60-B AD-030-B-80-B AD-030-E-20-B AD-033-B-40-B AD-033-B-60-B AD-033-B-80-B AD-033-E-10-B BL-200-E-10-B
Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.