Donaldson · Hydraulic Catalog · inline line
P573134 filter element: specifications & equivalents
The P573134 is a Donaldson inline-line hydraulic filter element, rated at 25 µm class. Verify against the current manufacturer data sheet before ordering.
Filtration rating 25 µm nom.
Line type inline
Partially verified. Fit and grade trace to an official interchange document;
dimensional values are compiled from 0 aftermarket listing(s)
and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.
Envelope dimensions, media type, collapse pressure and bypass settings are not printed in the competitive cross-reference tables. Verify against the current Donaldson data sheet and housing dimension page before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Filtration rating | 25 µm |
| Rating basis | nominal |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | P573134 |
| Source catalog | Donaldson Company: Hydraulic Filtration Product Guide (F112100-ENG) |
| Last verified | 2026-09-28 |
Sources: Donaldson Company — Hydraulic Filtration Product Guide (F112100-ENG) — accessed 2026-09-27.
Donaldson® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Donaldson distributor.
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 12240D20RT page in verification queue | Aftermarket | partial | Donaldson's F112100-ENG Competitive Cross-Reference table lists 1.22.40D20RT (HYDAC) as an interchange for the Donaldson P573134 element. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBFUE610-40Z25V | Schroeder Industries | partial | Donaldson's F112100-ENG Competitive Cross-Reference table lists SBFUE61040Z25V (Schroeder) as an interchange for the Donaldson P573134 element. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBFUE619-40Z25V | Schroeder Industries | partial | Donaldson's F112100-ENG Competitive Cross-Reference table lists SBFUE619-40Z25V (Schroeder) as an interchange for the Donaldson P573134 element. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ UE610AT40Z | Pall | partial | Donaldson's F112100-ENG Competitive Cross-Reference table lists UE610AT40Z (Pall) as an interchange for the Donaldson P573134 element. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ UE619AT40H | Pall | partial | Donaldson's F112100-ENG Competitive Cross-Reference table lists UE619AT40H or Z (Pall) as an interchange for the Donaldson P573134 element. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the P573134 model number is decoded
- P573134Donaldson hydraulic filter element part number per the Hydraulic Filtration Product Guide (F112100-ENG) Competitive Cross-Reference tables.
- 25 μmNominal filtration rating (25 μm).
Typical equipment & applications
- Donaldson hydraulic filter element per the F112100-ENG Competitive Cross-Reference tables.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What micron rating does P573134 use?
This element is rated 25 µm (nominal class). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the P573134 filter element?
5 partial match(es) requiring parameter review
How do I read the P573134 part number?
See the designation decoder above: each segment of P573134 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Other models in the Hydraulic Catalog series
All 360 →Reviewed & verified by the ElementRef engineering desk against Donaldson Company on 2026-09-28. Read our editorial & correction policy.