MANN-FILTER · HD / WD Hydraulic · inline line
WD10017X filter element: specifications & equivalents
The WD10017X is a MANN-FILTER inline-line hydraulic filter element, sized 96 × 131 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 96 × 131 mm
Thread 1 5/16-12 UNF
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.92.
Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 96 mm |
| Length | 131 mm |
| Thread / connection | 1 5/16-12 UNF |
| End caps | spin-on baseplate with attached gasket |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | WD10017X_MANN-FILTER |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-09-28 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.
Dimensions & series range
| Outside diameter | 96 mm (3.780 in) |
| Overall length | 131 mm (5.157 in) |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 20170 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 20170 (LÖSING FILTERTECHNIK) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ 51422 | WIX Filters | partial | MANN-FILTER's online catalog lists 51422 (WIX) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ BT28210 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists BT282-10 (BALDWIN) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ BT8449 | Baldwin Filters | partial | MANN-FILTER's online catalog lists BT8449 (BALDWIN) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ CS050190P25A page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists CS-050-19-0-P25-A (FAI FILTRI) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ FH40 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists FH-40 (MOTORCRAFT) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6160 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6160 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6160 | Fleetguard | partial | Fleetguard's online catalog lists WD10017X as an interchange for HF6160. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ L146 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists L 146 (KRALINATOR) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ LFH4944 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists LFH4944 (LUBER-FINER) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P165243 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P165243 (DONALDSON) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P3415 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P3415 (FRAM) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ PF854 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists PF854 (AC DELCO) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH56210 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SH 56210 (HIFI-FILTER (JURA FILTRATION)) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SPH9515 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SPH 9515 (SCHUPP / SF FILTER) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WGH6160 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists WGH 6160 (WOODGATE) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WHS46082 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists WHS46082 (WISMET) as a comparison number for WD10017X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the WD10017X model number is decoded
- WD10017XMANN-FILTER hydraulic spin-on filter part number.
- 131 mmElement height (H).
- 96 mmOuter diameter (A).
- 1 5/16-12 UNFSpin-on mounting thread.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the WD10017X filter element?
The published envelope is 96 mm OD × 131 mm length (3.780 × 5.157 in). Confirm against the housing drawing before ordering.
What replaces the WD10017X filter element?
17 partial match(es) requiring parameter review
How do I read the WD10017X part number?
See the designation decoder above: each segment of WD10017X encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Other models in the HD / WD Hydraulic series
All 880 →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.