MANN-FILTER · HD / WD Hydraulic · inline line
WD10018 filter element: specifications & equivalents
The WD10018 is a MANN-FILTER inline-line hydraulic filter element, sized 96 × 210 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 96 × 210 mm
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.92.
Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 96 mm |
| Length | 210 mm |
| End caps | spin-on baseplate with attached gasket |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | WD10018_MANN-FILTER |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-09-28 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.
Dimensions & series range
| Outside diameter | 96 mm (3.780 in) |
| Overall length | 210 mm (8.268 in) |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 8000500 page in verification queue | UFI | partial | MANN-FILTER's online catalog lists 80.005.00 (UFI) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ A03A10C page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists A03A10C (WIX) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ BT8473 | Baldwin Filters | partial | MANN-FILTER's online catalog lists BT8473 (BALDWIN) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ CA801 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists CA 801 (FBO) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ CCA152ECD1 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists CCA 152-E-CD-1 (SOFIMA) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ CS07000P10A page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists CS 070 0 0 P10 A (FAI FILTRI) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ CS070P10A page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists CS070P10A (MP FILTRI) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ DGMH70P10 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists DGM/H 70 P 10 (DIGOEMA FILTER) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ ESE12NCC page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists ESE 12-N-CC (UFI) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HEK4520180ASSP010B page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HEK 45-20.180-AS-SP010-B (IKRON) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6536 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6536 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6536 | Fleetguard | partial | Fleetguard's online catalog lists WD10018 as an interchange for HF6536. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HHC01836 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HHC01836 (IKRON) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HY821W page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HY821W (HENGST) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ NO103780 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists NO 103780 (NOITECH) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P171610 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P171610 (DONALDSON) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SFC-3610-E | STAUFF | partial | STAUFF Filter Interchange lists WD10018 (MANN-Filter) as replaced by SFC-3610-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
| ↔ SFC-3610-E | STAUFF | partial | MANN-FILTER's online catalog lists SFC3610E (STAUFF) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH63081 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SH 63081 (HIFI-FILTER (JURA FILTRATION)) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SPH18054 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SPH 18054 (SCHUPP / SF FILTER) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SPH9850 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SPH 9850 (SCHUPP / SF FILTER) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WGH9169 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists WGH9169 (WOODGATE) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WHS46153 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists WHS46153 (WISMET) as a comparison number for WD10018. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the WD10018 model number is decoded
- WD10018MANN-FILTER hydraulic spin-on filter part number.
- 210 mmElement height (H).
- 96 mmOuter diameter (A).
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the WD10018 filter element?
The published envelope is 96 mm OD × 210 mm length (3.780 × 8.268 in). Confirm against the housing drawing before ordering.
What replaces the WD10018 filter element?
23 partial match(es) requiring parameter review
How do I read the WD10018 part number?
See the designation decoder above: each segment of WD10018 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Other models in the HD / WD Hydraulic series
All 880 →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.